0, 1, 1E, 5, 6, 10, 50, 60 RAID Level – 6 Total SAS Ports – RAID Supported – Adaptec 2274900-R 72405 24-Ports SAS/SATA RAID Controller – Plug-in Card – 6 SAS Ports Internal – PCI Express 3.0 x8

#ad
Adaptec ASR-72405 #ad - Adaptec series 7 raid adapters is available with 24 native SAS/SATA ports. While the pcie gen3 interface doubles bandwidth to the host compared to PCIe Gen2, it requires at least 16 6Gb/s SAS/SATA ports to double the bandwidth to the storage devices. Manufacturer:Adaptec, Inc. Adaptec raid code arc delivers maximum reliability with raid levels 0, 1e, 1E, 5, 1, 10, 6, and 10, 1, 50 and 60 71605E supports 0, only .

New to series 7 is its auto configuration capability. Product Series:7. Product model:72405. Users can operate in hba mode expose drives to the host directly or Simple Volume mode use fast DRAM cache to reduce latency and improve performance, without the need to use setup tools. Brand Name:Adaptec. The adaptec series 7 raid adapter family features pmc's 24 port pm8015 raid-on-chip roc, which combines a x8 PCIe Gen3 interface with 6Gb/s SAS ports to enable a new generation of high- performance RAID adapters that are unmatched by any other ROC in the industry.

0, 1, 1E, 5, 6, 10, 50, 60 RAID Level - 6 Total SAS Ports - RAID Supported - Adaptec 2274900-R 72405 24-Ports SAS/SATA RAID Controller - Plug-in Card - 6 SAS Ports Internal - PCI Express 3.0 x8 #ad - Competing 6gb/s solutions have only 8 ports, and cannot leverage that advantage. Series 7 adapters perform at up to 6. 6 gb/s on sequential reads and up to 2. 6 gb/s on sequential writes on parity RAID 5, more than doubling the performance of competing host-based RAID adapters. Arc also offers raid level migration the ability to easily migrate raID levels, Online Capacity Expansion expand capacity without powering down the server, and Copyback Hot Spare when a failed drive has been replaced, data is automatically copied from the hot spare back to the restored drive.

More information about Adaptec ASR-72405 #ad

Cable Matters Internal Mini SAS to SATA Cable SFF-8087 to SATA Forward Breakout 3.3 Feet

#ad
Cable Matters 104016 #ad - Storage expansion with a lifetime warranty Maximize the capacity of your RAID configuration with this robust but flexible cable that is built to withstand 24/7 use. The combination of a slim ribbon cable design in a woven mesh sheath with locking connector latches provides a professional installation that minimizes the impact on airflow in a computer case.

A lifetime warranty is included with this Mini-SAS to SATA cable for peace of mind when purchasing. Diy or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs; 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management; Slim ribbon cables minimize airflow impact in a computer case.

Leverage hardware raid performance with this sata multi-lane cable; two cables can connect up to 8 sata drives to span RAID controller arrays and share performance across two PCIe 2. 0 x8 lanes with compatible host bus adapters; Supports up to 6Gbs data transfer rate per drive. Connect more with cable matters sata cabling products diy or pro computer Essential The Cable Matters Mini-SAS to 4 SATA Forward Breakout Cable is an essential component of a hardware RAID configuration.

Cable Matters Internal Mini SAS to SATA Cable SFF-8087 to SATA Forward Breakout 3.3 Feet #ad - Important notes - pair with a 4 port sata to power splitter cable to provide power to the drives - data transfer speed is determined by the capabilities of your SAS controller and SATA drives Cable Specifications - Host/Controller Connection: 1 x 36 pin Mini-SAS SFF-8087 - male with latch - SATA Drive Connections: 4 x 7 pin SATA receptacle - female with latch - Length: 3.

3 feet - wire - 30 awg style 207044 flat ribbon cable - Compatible with 2. 5", 3.

More information about Cable Matters 104016 #ad


Similar products