Access to all ports Clear – iUniker Raspberry Pi 3 b+ Case, Raspberry Pi 3 Model B+ Transparent Case with Raspberry Pi Heatsink for Raspberry Pi 3B+, 3B, 2B

iUniker IU-RP-047 - The case is a made of ABS that snaps together around the Raspberry Pi. It provides the best available protection/accessibility for the Raspberry Pi. Wall mountable. For new raspberry Pi 3 b+. Access to All ports. This is an abs raspberry pi protective clear case for raspberry pi 3 b+, 2b package include: 1x Pi Case 1x Screw Set 2x Heatsink 4x Rubber Base This is a very nice looking clear protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 3B, 2B.

Raspberry pi is not included, Comes with 2pcs Heatsink.

More information about iUniker IU-RP-047

Element14 Raspberry Pi 3 B+ Motherboard

Element14 Raspberry Pi 3 Model B+ - To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. 5a adapter is required. New original raspberry Pi 3 Model B+ Built-in Broadcom 1. 4ghz quad-core 64 bit processor with low energy on-board wifi bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors.

Technical specifications: - broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1. 4ghz- 1gb ram - bcm43143 wifi on board - bluetooth low energy ble on board - 40 pin extended gpio - 4 x usb2 ports - 4 pole stereo output and composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source now supports up to 2.

Element14 Raspberry Pi 3 B+ Motherboard - 5 amps. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. 802. 11n wireless lan, 10/100Mbps Lan Speed. Package contents : - 1x Raspberry Pi 3 Model B+ 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM.

More information about Element14 Raspberry Pi 3 Model B+


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply/Adapter UL Listed

CanaKit DCAR-RSP-2A5 - It is also ideal for use by anyone over-clocking the Raspberry Pi which causes higher power requirements that a lower power adapter may not be able to supply. Bluetooth 4. 2, bluetooth Low Energy. Micro USB plug. The power supply still has about 05a of output power to spare, so even at the maximum current supported by the Raspberry Pi 3, the power supply is not at its absolute maximum.

1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Output: 5v dc / 2. 5a regulated input: 100 - 240VAC. 802. 11n wireless lan, 10/100Mbps Lan Speed. The canaKit 2. 5a raspberry pi power supply / adapter has been specially designed and tested for the new Raspberry Pi 3 and incorporates an inline noise filter for highest stability and reliable operation.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply/Adapter UL Listed - 5-feet cable with integrated noise filter. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2, Pi 3 and Pi 3 B+.

More information about CanaKit DCAR-RSP-2A5


Similar products



LoveRPi Raspberry Pi 3 B+ 8GB Quick Start Kit

LoveRPi NA - Bluetooth 4. 2, bluetooth Low Energy. Ul listed. What's included: raspberry pi 3 model b+ mini computer microsd card pre-flashed with raspbian Desktop MicroSD to SD Card Adapter LoveRPi® Performance Heatsink Set Additional Recommended Components Not Included: USB Keyboard and Mouse LoveRPi® Certified 2.

5a microusb power supply with power switch hdmi cable If the red LED on the board blinks or turns off at any time after you have connected power, your power supply may be inadequate. Micro USB plug. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

LoveRPi Raspberry Pi 3 B+ 8GB Quick Start Kit - Tested with all versions of the Raspberry Pi including the Pi 2, Pi 3 and Pi 3 B+. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. It is fully compatible with our power-Over-Ethernet HAT and Active Cooling Media Center Case for the ultimate mini computer! . The metal heatspreader allows it to run at the top speed of 1.

4ghz for longer than the previous model.

More information about LoveRPi NA


Similar products



RS Components Raspberry Pi 3 B+ Motherboard

RS Components 3BPLUS-R - 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2, Pi 3 and Pi 3 B+. The metal heatspreader allows it to run at the top speed of 1.

4ghz for longer than the previous model. Fully connected: improvements to antenna design and connectivity brings 5ghz WiFi AC for nearly 5X the WiFi performance than the previous 2. 4ghz wifi N. Ultimate mini computer: raspberry pi 3 model b+ is new and improved for 2018 with faster CPU and GPU performance, Power-Over-Ethernet Capable Gigabit Ethernet, advanced 5GHz WiFi-AC, Bluetooth LE capabilities, and more!.

RS Components Raspberry Pi 3 B+ Motherboard - Armed with improvements: the soc at the heart of the board has been re-designed to improve performance by over 30%. Bluetooth 4. 2, bluetooth Low Energy. Output: 5v dc / 2. 5a regulated input: 100 - 240VAC. 802. 11n wireless lan, 10/100Mbps Lan Speed.

More information about RS Components 3BPLUS-R


Similar products



Raspberry Pi 3 Model B Motherboard

RASPBERRY PI RASPBERRYPI3-MODB-1GB - 5-feet cable with integrated noise filter. Bluetooth 4. 2, bluetooth Low Energy. Ultimate mini computer: raspberry pi 3 model b+ is new and improved for 2018 with faster CPU and GPU performance, Power-Over-Ethernet Capable Gigabit Ethernet, advanced 5GHz WiFi-AC, Bluetooth LE capabilities, and more!. Armed with improvements: the soc at the heart of the board has been re-designed to improve performance by over 30%.

It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

Raspberry Pi 3 Model B Motherboard - Tested with all versions of the Raspberry Pi including the Pi 2, Pi 3 and Pi 3 B+. The metal heatspreader allows it to run at the top speed of 1. 4ghz for longer than the previous model. Fully connected: improvements to antenna design and connectivity brings 5ghz WiFi AC for nearly 5X the WiFi performance than the previous 2.

4ghz wifi N. 1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB


Similar products



CanaKit 2.5A Raspberry Pi 3 B+ Power Supply with CanaKit PiSwitch

CanaKit 99248 - Micro USB plug. 5-feet cable with integrated noise filter. 1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM. Ul listed. This bundle includes the CanaKit 2. 5a power supply with the CanaKit PiSwitch! The CanaKit 2. 5a raspberry pi power supply / adapter has been specially designed and tested for the new Raspberry Pi 3 B+ and incorporates an inline noise filter for highest stability and reliable operation.

802. 11n wireless lan, 10/100Mbps Lan Speed. Bluetooth 4. 2, bluetooth Low Energy. Output: 5v dc / 2. 5a regulated input: 100 - 240VAC. It is fully compatible with our power-Over-Ethernet HAT and Active Cooling Media Center Case for the ultimate mini computer! This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2.

CanaKit 2.5A Raspberry Pi 3 B+ Power Supply with CanaKit PiSwitch - 5a and still output a voltage well within the USB minimum voltage specifications. The metal heatspreader allows it to run at the top speed of 1. 4ghz for longer than the previous model. Fully connected: improvements to antenna design and connectivity brings 5ghz WiFi AC for nearly 5X the WiFi performance than the previous 2.

4ghz wifi N.

More information about CanaKit 99248


Similar products



MFH-D 5V/2.5A Power Supply Micro USB Charger Adapter with On Off Switch for Raspberry Pi 3/2 Model B

MFH-D 4350280139 - Specification: input voltage: ac ac100-240v 50 / 60HZ Output voltage: DC DC5V Output current: up to 2. 5a voltage accuracy: ± 5% no load Default Plug Style: USB Ripple control:.

More information about MFH-D 4350280139


Similar products



NorthPada Raspberry Pi 3 Model B B+ A+ Plus Power Supply Charger AC Adapter 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch 1 X Power Supply

NorthPada - 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Supports all versions of the Raspberry Pi including the Pi 3 B+. For raspberry pi 3 model b b+ a+ raspberry pi 2 model B Raspberry Pi A/A+/B/B+ Raspberry Pi Zero 1.

4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. The metal heatspreader allows it to run at the top speed of 1. 4ghz for longer than the previous model. Fully connected: improvements to antenna design and connectivity brings 5ghz WiFi AC for nearly 5X the WiFi performance than the previous 2. 4ghz wifi N. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.

NorthPada Raspberry Pi 3 Model B B+ A+ Plus Power Supply Charger AC Adapter 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch 1 X Power Supply - 5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2, Pi 3 and Pi 3 B+. Cable length: 150cm/5feet with Power On/Off Switch, Inline Noise Filter.

Bluetooth 4. 2, bluetooth Low Energy.

More information about NorthPada


Similar products



Enokay Power Supply for Raspberry Pi 5V 2.5A Micro USB Charger Adapter with On Off Switch

Shen Zhen Eno Electronic Co.,Ltd EN24 - 100% brand New. Input:ac 100-240v/ 50-60hz;output:dC 5V/2500mA. The metal heatspreader allows it to run at the top speed of 1. 4ghz for longer than the previous model. Fully connected: improvements to antenna design and connectivity brings 5ghz WiFi AC for nearly 5X the WiFi performance than the previous 2. 4ghz wifi N.

Package includes: 1x power adapter, 1x Micro USB Cable with ON / OFF Switch. Bluetooth 4. 2, bluetooth Low Energy. Micro USB plug. Bluetooth 4. 2, bluetooth Low Energy. Enough power supply for your raspberry pi 2 3 and your USB device. 1. Input:ac 100-240v/ 50-60hz ;output:dc 5V/2500mA2. Cable length: 1~1. 5 meter3. Enough power supply for your raspberry pi 2 3 and your USB device4.

Enokay Power Supply for Raspberry Pi 5V 2.5A Micro USB Charger Adapter with On Off Switch - Micro usb cable with on / off switch for your CONVENIENCE. Ul listed. For raspberry pi 3 model b b+ a+ raspberry pi 2 Model B Raspberry Pi A/A+/B/B+ Raspberry Pi Zero.

More information about Shen Zhen Eno Electronic Co.,Ltd EN24


Similar products