Adafruit SGP30 Air Quality Sensor Breakout – VOC and eCO2 3709

#ad
Adafruit #ad - Breathe easy with the sgp30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a gas sensor that can detect a wide range of Volatile Organic Compounds VOCs and H2 and is intended for indoor air quality monitoring. Another nice element to this sensor is the ability to set humidity compensation for better accuracy.

This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. The sgp30 does have built in calibration capabilities, note that eCO2 is calculated based on H2 concentration, it is not a 'true' CO2 sensor for laboratory use.

. Output signals with a typical accuracy of 15%. Unlike the ccs811, this sensor does not require I2C clock stretching. The sgp combines multiple metal-oxide sensing elements on one chip to provide more detailed air quality signals. This part will measure eCO2. An external humidity sensor is required and then the RH% is written over I2C to the sensor, so it can better calculate the TVOC/eCO2 values.

Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 3709 #ad - Fully integrated MOX gas sensor. This part will measure eco2 equivalent calculated carbon-dioxide concentration within a range of 0 to 60, and TVOC Total Volatile Organic Compound concentration within a range of 0 to 60, 000 parts per million ppm, 000 parts per billion ppb. The sgp30 has a 'standard' hot-plate mox sensor, calculates tvoc and eCO2 values, as well as a small microcontroller that controls power to the plate, tracks the baseline calibration, reads the analog voltage, and provides an I2C interface to read from.

More information about Adafruit #ad

Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2

#ad
Adafruit #ad - 21. 0mm x 18. 0mm x 3. 0mm. Uses i2c address 0x5A. The ccs811 has a 'standard' hot-plate mox sensor, reads the analog voltage, as well as a small microcontroller that controls power to the plate, and provides an I2C interface to read from. There is also an onboard thermistor that can be used to calculate the local ambient temperature.

Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2 #ad - When connected to your microcontroller running our library code it will return a Total Volatile Organic Compound TVOC reading and an equivalent carbon dioxide reading eCO2 over I2C. Breathe easy - we finally have an i2c voc/eco2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout.

This sensor from ams is a gas sensor that can detect a wide range of Volatile Organic Compounds VOCs and is intended for indoor air quality monitoring. 1. 2g.

More information about Adafruit #ad


Similar products



Adafruit VEML6075 UVA UVB UV Index Sensor Breakout 3964

#ad
Adafruit #ad - Product dimensions: 17. 0mm x 15. 3mm x 2. 9mm / 07" x 06" x 01". Some light soldering is required to attach the header but it's a fast task! Uses i2c address 0x5A. Each order comes with one assembled PCB with a sensor, power regulator, level shifting and a small piece of header. So far this is the best uv sensor we've got! this uV sensor works great with 3 or 5V power or logic, its nice and compact, and its easy to use with any I2C-capable microcontroller.

Product weight: 08g / 00oz. Unlike the si1145, it has a real uv sensor, and in contrast to the VEML6070, it has dual band senors and an Index calculation algorithm. Uses i2c address 0x10 The sensor also comes with calibration registers so you can easily convert the UVA/UVB readings into the UV Index. Compared to our other uv sensors, this one actually does a pretty good job of getting accurate UV data.

Adafruit VEML6075 UVA UVB UV Index Sensor Breakout 3964 #ad - This little sensor is a great way to add UVA and UVB light sensing to any microcontroller project. The veml6075 from vishay has both true uva and UVB band light sensors and an I2C-controlled ADC that will take readings and integrate them. 1. 2g.

More information about Adafruit #ad


Similar products



Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor

#ad
Adafruit #ad - Uses i2c address 0x10 Adafruit made it easy for you to get right into your next project. 21. 0mm x 18. 0mm x 3. 0mm. It has the same specifications, but can use either I2C or SPI. Bosch has stepped up their game with their new bme280 sensor, an environmental sensor with temperature, barometric pressure with ±1 hPa absolute accuraccy, barometric pressure and humidity! This sensor is great for all sorts of weather/environmental sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy, and temperature with ±1.

0°c accuracy. Product dimensions: 17. 0mm x 15. 3mm x 2. 9mm / 07" x 06" x 01". For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI. Adafruit wrote up a nice tutorial with wiring diagrams, schematics, libraries and examples to get you running in 10 minutes! Uses i2c address 0x5A.

Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor #ad - Product weight: 0

More information about Adafruit #ad


Similar products



Adafruit Perma-Proto Half-sized Breadboard PCB - 3 Pack! ADA571

#ad
Adafruit 571 #ad - All holes are thru-plated for strength - these wont peel off with rework. 1. 2g. That's when we realized what people would really like is a proto board that makes it easy! This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a half-sized breadboard and turned that into a beautiful PCB.

In stock & Ready to Ship. They'll also fit nicely in an Altoids-sized mint tin These are so handy, we decided to put them in a pack of 3. Stock type: prototyping >> Breadboards & Protoboards >> Packs. The finish is a gold plate - you won't get oxidation like with bare copper perf! There are also two mounting holes so you can attach the PCB to your project box.

Adafruit Perma-Proto Half-sized Breadboard PCB - 3 Pack! ADA571 #ad - Adafruit part Number: 571. Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling. The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy.

21. 0mm x 18. 0mm x 3. 0mm. Uses i2c address 0x10

More information about Adafruit 571 #ad


Similar products



Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout

#ad
Adafruit #ad - Please note: this sensor is sensitive to co ~ 1 to 1000 ppm, ethanol ~ 10 to 500 ppm, h2 ~ 1 - 1000 ppm, Ammonia ~ 1 to 500 ppm, and Methane / Propane / Iso-Butane ~ 1, 000++ ppm. Uses i2c address 0x5A. This breakout board is not for any safety, medical or finished product usage. We're selling it for hobby education & experimentation and don't guarantee it for any other purpose! All gas sensors require calibration for precision output.

Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout #ad - You'll need to do some light soldering to attach the header on - or you can use just plain wires. 21. 0mm x 18. 0mm x 3. 0mm. In stock & Ready to Ship. Uses i2c address 0x10 When gasses are detected, the analog voltage will increase in proportion of detected gas. Stock type: prototyping >> Breadboards & Protoboards >> Packs.

Product weight: 08g / 00oz. The mics-5524 is a robust mems sensor for indoor carbon monoxide and natural gas leakage detection, it's suitable also for indoor air quality monitoring; breath checker and early fire detection.

More information about Adafruit #ad


Similar products



CanaKit Raspberry Pi 4 Basic Kit 2GB RAM

#ad
CanaKit #ad - Important note: Raspberry Pi 4 compatible operating system is required for operation. Stock type: prototyping >> Breadboards & Protoboards >> Packs. Product dimensions: 17. 0mm x 15. 3mm x 2. 9mm / 07" x 06" x 01". In addition to the canakit usb-c power supply, this kit includes a set of 3 Aluminum Heat Sinks to keep the Raspberry Pi 4 cool as well as the Cana Kit Quick Start Guide.

The mics-5524 is a robust memS sensor for indoor carbon monoxide and natural gas leakage detection. Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM. In stock & Ready to Ship. This power supply incorporates a noise filter to provide the highest stability. Adafruit part Number: 571.

CanaKit Raspberry Pi 4 Basic Kit 2GB RAM #ad - Kit includes: - raspberry Pi 4 Model B with 1. 5ghz 64-bit quad-core armv8 cpu - 2gb ram - canakit usb-c power supply with noise filter ul listed specially designed for the Raspberry Pi 4 5-foot cable - CanaKit USB-C PiSwitch On/Off Power Switch - Set of 3 Aluminum Heat Sinks for the Raspberry Pi 4 Uses i2c address 0x5A.

21. 0mm x 18. 0mm x 3.

More information about CanaKit #ad


Similar products



Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield

#ad
Glarks 8541770554 #ad - Adafruit part Number: 571. 21. 0mm x 18. 0mm x 3. 0mm. 4. Specification: material: Insulated plastic, hard metal pin All Products Spacing: 2. 54mm/01 inches number of pins: 4pin, 11mm application: widely be used in arduino electronic diy, 8pin, such as for electronic circuit, 10mm, 6pin, electrical appliances, instrumentation, 10pin, 40pin Row Type: Single row and double row Gender of Connector: Male and Female Pin length: 2mm, PCB circuit board etc.

Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield #ad - Set of 3 aluminum Heat Sinks for the Raspberry Pi 4. Product weight: 08g / 00oz. Canakit 3. 5a usb-c power supply with noise Filter UL Listed specially designed for the Raspberry Pi 4 5-foot cable. Electronic project package details: 20pcs ---- 1 x 6pin long needle arduino stackable headers 20pcs ---- 1 x 8pin long needle arduino stackable headers 20pcs ---- 1 x 10pin long needle arduino stackable headers 10pcs ---- 1 x 6pin short needle arduino stackable headers 10pcs ---- 1 x 8pin short needle arduino stackable headers 10pcs ---- 1 x 10pin short needle arduino stackable headers 10pcs ---- 2 x 3pin short needle arduino stackable headers 2pcs --- 1 x 40pin single row male header for arduino prototype shield 2pcs --- 2 x 40pin double row male header for arduino prototype shield 2pcs --- 1 x 40pin single row right angle pcb pin headers 2pcs --- 2 x 40pin double row right angle pcb pin headers 2pcs --- 1 x 40pin straight single row pcb female pin headers 2pcs --- 2 x 40pin straight double row pcb female pin headers Total: 112pcs The pins are easy to trim to size and will fit snugly, 100% quality assurance to make you satisfied.

All products spacing: 2. 54mm/01 inches; number of pins: 4/6/8/10/40; Row Type: Single row and double row.

More information about Glarks 8541770554 #ad


Similar products



Vilros Raspberry Pi Zero W Basic Starter Kit- Black Case Edition-Includes Pi Zero W -Power Supply & Premium Black Case

#ad
Vilros 4328435424 #ad - 5. Product weight: 08g / 00oz. Uses i2c address 0x10 Adafruit part Number: 571. This is the vilros raspberry pi zero w basic kit--Clear Case Edition KIT CONTENT Raspberry Pi Zero W 2. 5a power supply designed for raspberry pi premium black 2 piece snap together Case with 3 CoversMicro USB OTG Double Pin Header Heatsink for Raspberry PI ZeroCamera Module AdapterPlastic Legs for Case Uses i2c address 0x5A.

What you get: this kit includes all types of pin headers you need, 40pcs short needle female pin headers, 12pcs breakaway male and female pin headers, 10 double pin headers, including 50pcs long needle female pin headers, stored in a transparent plastic box to meets all your needs in one kit.2. In stock & Ready to Ship.

Vilros Raspberry Pi Zero W Basic Starter Kit- Black Case Edition-Includes Pi Zero W -Power Supply & Premium Black Case #ad - Set of 3 aluminum Heat Sinks for the Raspberry Pi 4. The mics-5524 is a robust memS sensor for indoor carbon monoxide and natural gas leakage detection. Includes raspberry pi 4 model b with 1. 5ghz 64-bit quad-core armv8 CPU 2GB RAM. 40 pin header-heatsink for Raspberry PI Zero--Camera Module Adapter. Product dimensions: 17.

More information about Vilros 4328435424 #ad


Similar products



IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5 ...

#ad
IZOKEE IZKE29-5 #ad - We recommend using GIT, you can always get the latest version. Product weight: 08g / 00oz. Canakit usb-c piswitch On/Off Power Switch. 1 micro USB connection. Package includes: 5 x d1 mini nodemcu lua WLAN WIFI Internet Development Board Uses i2c address 0x5A. Wifi development Board, 4M bytes. 5v 1a switching power supply onboard.

IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5 ... #ad - Product dimensions: 17. 0mm x 15. 3mm x 2. 9mm / 07" x 06" x 01". Feature: they are the perfect height for clearing the USB-B connector and great for stacking multiple shields. 1. 2g. Stock type: prototyping >> Breadboards & Protoboards >> Packs. 21. 0mm x 18. 0mm x 3. 0mm. All products spacing: 2. 54mm/0

More information about IZOKEE IZKE29-5 #ad


Similar products



Electronix Express- Hook up Wire Kit Solid Wire Kit 22 Gage 25 Feet

#ad
RSR Electronics Inc 27WK22SLD25 #ad - This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / output pins, all pins have interrupt / I2C / pwm / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Six 22 gauge solid Wire Spools by Electronix Express.

Electronix Express- Hook up Wire Kit Solid Wire Kit 22 Gage 25 Feet #ad - Resistant to water, oil - also flame retardant. In stock & Ready to Ship. Material: Insulated plastic, hard metal pin. Application: perfect used for wire connecting in the field of Automotive, electrical appliances and Internet, especially for the computer and breadboard. Product weight: 08g / 00oz. Set of 3 aluminum Heat Sinks for the Raspberry Pi 4.

1. Insulation: PVC. 010". Each wire spool is 25 feet in length, tinned copper wire. Voltage rating: 300 Volts. Product dimensions: 17.

More information about RSR Electronics Inc 27WK22SLD25 #ad


Similar products