Assembled Adafruit Feather Huzzah with ESP8266 WiFi with Headers

#ad
Adafruit 8541612194 #ad - Built in wifi 802. 11 b/g/n. Feather is the flagship development board from Adafruit, light, and like its namesake it is thin, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. At the feather huzzah's heart is an esp8266 WiFi microcontroller clocked at 80 MHz and at 3.

3v logic. This is the assembled adafruit feather huzzah esp8266 with headers - our take on an 'all-in-one' esp8266 wiFi development board with built in USB and battery charging and ready to go immediately! Its an ESP8266 WiFi module with all the extras you need, ready to rock! We have other boards in the Feather family, check'em out here.

Assembled Adafruit Feather Huzzah with ESP8266 WiFi with Headers #ad - This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You don't need a battery, it will run just fine straight from the micro USB connector. 4mb of flash 32 MBit. The feather will automatically switch over to USB power when its available. It also has auto-reset so no noodling with pins and reset button pressings.

We wired up a usb-serial chip that an upload code at a blistering 921600 baud for fast development time. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. Cp2104 usb-serial converter onboard with 921600 max baudrate for uploading.

More information about Adafruit 8541612194 #ad

3.7v 500mAh - ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery

#ad
Adafruit 1578 #ad - More information about Adafruit 1578 #ad


Similar products



Adafruit PID 3213 Assembled Feather Huzzah w/ ESP8266 WiFi with Stacking Headers

#ad
Adafruit NA #ad - This is the adafruit feather huzzah esp8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Cp2104 usb-serial converter onboard with 921600 max baudrate for uploading. Feather is the new development board from Adafruit, light, and like its namesake it is thin, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

It also has auto-reset so no noodling with pins and reset button pressings. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. To make it easy to use for portable projects, we added a connector for any of our 3. 7v lithium polymer batteries and built in battery charging.

Adafruit PID 3213 Assembled Feather Huzzah w/ ESP8266 WiFi with Stacking Headers #ad - This microcontroller contains a Tensilica chip core as well as a full WiFi stack. At the feather huzzah's heart is an esp8266 WiFi microcontroller clocked at 80 MHz and at 3. 3v logic. We wired up a usb-serial chip that an upload code at a blistering 921600 baud for fast development time. You don't need a battery, it will run just fine straight from the micro USB connector.

Measures 2.

More information about Adafruit NA #ad


Similar products



ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits

#ad
ELEGOO CA-EL-CP-021 #ad - The high quality of glass fiber material and the great durability of the board can always meet you requirements in various situation. High quality of durable glass fiber -FR4 material with 1. 6mm thickness makes a very solid and sturdy prototype circuit board. 5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.

Cp2104 usb-serial converter onboard with 921600 max baudrate for uploading. Come to meet elegoo double sided Porotype board which is widely used among electronic experiments and point-to-point DIY soldering projects. With the perfect designed pre-tined holes on the board you can easily install any sensors and components you need.

ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits #ad - Product specification: - dimension: 4x6/ 3x7/ 5x7/ 2x8/ 7x9 CM - Quantity: 32 pieces in total of 5 different sizes - Thickness: about 1. 6mm - material: great quality of glass fiber FR4 - Color: Green basic, silver tone - Hole-pitch: 2. 54 mm/ 01 inches - hole-diameter: 1 mm/ 004 inches package list: - 6pcs 4x6cm double-sided pcb board with 280 holes - 10pcs 3x7cm double-sided pcb board with 240 holes - 7pcs 5x7cm double-sided PCB board with 432 holes - 7pcs 2 X 8CM double-sided PCB board with 168 holes - 2pcs 7 X 9CM double-sided PCB board with 806 holes Esp8266 @ 80mhz with 3.

3v logic/power 4mb of flash 32 mBit Built in WiFi 802. 11 b/g/n.

More information about ELEGOO CA-EL-CP-021 #ad


Similar products



HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Pack of 2PCS

#ad
HiLetgo 3-01-0268 #ad - Set up your arduino ide as: go to file->preferences and copy the URL below to get the ESP board manager extensions: http://arduino. Esp8266. Com/stable/package_esp8266com_index. Json placing the http:// before the URL lets the Arduino IDE use it. Otherwise it gives you a protocol error. 9 x gpio pins - can also be used as I2C and SPI.

We provide 100% satisfication service for customers. Full i/o port and wireless 802. 11 supported, direct download no need to reset. Load, compile and upload. Built-in micro-usb, with flash and reset switches, easy to program. Set up your chip as: tools -> Board -> NodeMCU 1. 0 esp-12e module tools -> flash size -> 4m 3m spiffs tools -> cpu frequency -> 80 mhz tools -> Upload Speed -> 921600 Tools-->Port--> whatever it is 6.

HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Pack of 2PCS #ad - Install the IDE 3. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. 32 pieces double sided pcb prototype boards well packed in a plastic tray which is very easy to store and take out.

Go to file> examples> esp8266> blink, it will start blinking. Measures 2.

More information about HiLetgo 3-01-0268 #ad


Similar products



ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks

#ad
ELEGOO EL-CP-003 #ad - We have the manufacture factory, making productions and selling by ourselves. 4 mounting holes at the corners of the board are very convenient for installing them together. Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects. Color legend on distribution strips.

830 tie points total. 3. 3v regulator with 500mA peak current output. Measures 2. 0" x 09" x 028" 51mm x 23mm x 8mm without headers soldered in Light as a large? feather - 9. 7 grams. With self-adhesive tape on the back, make it easy to stick on the Arduino prototype shield. 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.

ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks #ad - Colored power rails for wires 21 to 26 awg 2-sided peelable adhesive tape Component listing: 3pcs 830 tie-points breadboard Esp8266 @ 80mhz with 3. 3v logic/power 4mb of flash 32 mBit Built in WiFi 802. 11 b/g/n. 32 pieces double sided pcb prototype boards well packed in a plastic tray which is very easy to store and take out.

More information about ELEGOO EL-CP-003 #ad


Similar products



Adafruit Accessories Terminal Block Breakout FeatherWing Kit for all Feather Boards

#ad
Adafruit Industries LYSB01DPT1QGY-ELECTRNCS #ad - Esp8266 @ 80mhz with 3. 3v logic/power 4mb of flash 32 mBit Built in WiFi 802. 11 b/g/n. Creates a nice prototyping area underneath your Feather, with extra pads for ground, 3. 3v and sda/SCL. High quality of durable glass fiber -FR4 material with 1. 6mm thickness makes a very solid and sturdy prototype circuit board.

We also give you a few extra terminal block pins for ground and 3. 3v connections since those are so useful. Finally, there's a spot for soldering in a slide switch. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. The terminal block breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings eg.

Adafruit Accessories Terminal Block Breakout FeatherWing Kit for all Feather Boards #ad - . 4 mounting holes at the corners of the board are very convenient for installing them together. Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects. Soldering is required to assemble the Terminal Block Breakout FeatherWing, but it's not too tough if you've got a soldering iron and some basic hand tools.

Soldering is required to assemble the Terminal Block Breakout FeatherWing, but it's not too tough if you've got a soldering iron and some basic hand tools. Comes as a kit with a nice PCB, socket headers, terminal blocks, and a slide switch. Four mounting holes so you can attach the breakout to your enclosure or project.

More information about Adafruit Industries LYSB01DPT1QGY-ELECTRNCS #ad


Similar products



Adafruit 2821 Feather Huzzah with ESP8266 Wi-Fi

#ad
Adafruit Industries 2821 #ad - 5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. 9 x gpio pins - can also be used as I2C and SPI. Cp2104 usb-serial converter onboard with 921600 max baudrate for uploading. 4mb of flash and built in wifi 802. 11 b/g/n. This controller contains a tensile chip core as well as a full WiFi stack.

At the feather huzzah's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3. 3v logic. Soldering is required to assemble the Terminal Block Breakout FeatherWing, but it's not too tough if you've got a soldering iron and some basic hand tools. Comes as a kit with a nice PCB, socket headers, terminal blocks, and a slide switch.

Adafruit 2821 Feather Huzzah with ESP8266 Wi-Fi #ad - Four mounting holes so you can attach the breakout to your enclosure or project. Measures 2. 0" x 09" x 028" without headers soldered in. Pin #2 blue led for bootloading debug & general purpose blinking. Reset button. The cp2104 has better driver support than the CH340 and can do very high speeds without stability issues.

More information about Adafruit Industries 2821 #ad


Similar products



Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

#ad
Esooho ABCD #ad - This is Solderable Breadboard. Measures 2. 0" x 09" x 028" 51mm x 23mm x 8mm without headers soldered in Light as a large? feather - 9. 7 grams. We have always cared about the customer experience and improve the product function details. Full i/o port and wireless 802. 11 supported, direct download no need to reset.

. Power/enable pin and 4 mounting holes. White abs plastic body with black printed legend. Works with all Adafruit Feather boards. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place Breadboard PCB for any type Raspberry Pi GPIO Gold plated finish prevents oxidation, High quality Gold finish for easy soldering All holes are through-plated for strength Pack of 5PCS Esp8266 @ 80mhz with 3.

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007 #ad - 3v logic/power 4mb of flash 32 mBit Built in WiFi 802. 11 b/g/n. Pack of 5pcs, has changed the package on 8th November, 2018. Built-in micro-usb, with flash and reset switches, easy to program. Breadboard pcb for any type Raspberry Pi GPIO. A bare pcb that is the exact size as our regular breadboard with the same connections to pins and power rails.

High quality of durable glass fiber -FR4 material with 1.

More information about Esooho ABCD #ad


Similar products



Adafruit FTDI Serial TTL-232 USB Cable ADA70

#ad
Adafruit 70 #ad - You can download the drivers and the diagram / spec sheet which has mechanical cable details. Cp2104 usb-serial converter onboard with 921600 max baudrate for uploading. Works with all Adafruit Feather boards. Pack of 5pcs, has changed the package on 8th November, 2018. Ftdi cable. High quality of durable glass fiber -FR4 material with 1.

6mm thickness makes a very solid and sturdy prototype circuit board. 5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. Color legend on distribution strips. Packing in a paper box. 4mb of flash and built in wifi 802. 11 b/g/n. Just about all electronics use TTL serial for debugging, bootloading, serial output, programming, etc.

Adafruit FTDI Serial TTL-232 USB Cable ADA70 #ad - Because the cable is 5v-logic compliant, you can use it with 3v or 5v logic just fine - no level shifting required! Useful whenever you want to communicate with a TTL serial device, such as an XBee. We suggest this for any product that needs FTDI cables. Works with 5V boards with minor tweaking. 3.

More information about Adafruit 70 #ad


Similar products



TUOFENG 22 awg Solid Wire-Solid Wire Kit-6 different colored 30 Feet spools 22 gauge Jumper wire- Hook up Wire Kit

#ad
TUOFENG #ad - Breadboard pcb for any type Raspberry Pi GPIO. Data signals are at 3V. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place. All holes are through-plated for strength. Measures 2. 0" x 09" x 028" 51mm x 23mm x 8mm without headers soldered in Light as a large? feather - 9.

7 grams. Pack of 5pcs, has changed the package on 8th November, 2018. Ftdi cable. Works with all Adafruit Feather boards. Translucent body with RX/TX LEDs. White abs plastic body with black printed legend. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Reset button. Full i/o port and wireless 802.

TUOFENG 22 awg Solid Wire-Solid Wire Kit-6 different colored 30 Feet spools 22 gauge Jumper wire- Hook up Wire Kit #ad - 11 supported, direct download no need to reset. We have always cared about the customer experience and improve the product function details. Power/enable pin and 4 mounting holes. 4mb of flash and built in wifi 802.

More information about TUOFENG #ad


Similar products