DE10-Nano Kit

#ad
Terasic P0496 #ad - 1 gibabit ethernet phy; usb micro-AB Connect; Mirco SD Card Socket. 110k les; 5570 kbits embedded memory; 6 PLLs; 2 Hard Memory Controllers. 800mhz dual-core arm cortex-a9 process; 1gb DDR3 SDRAM; 32-bit Data Bus.

More information about Terasic P0496 #ad

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Charging Dongle Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

#ad
MakerSpot AH10094 #ad - Easy plug and play installation device, 1. 5mbps. Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, Orange Pi, ODROID, Banana Pi. Compatible with samsung galaxy s2, samsung galaxy note, sony xperla acro hdis12s. Toshiba regza phone-to1D, Galaxy Tab3 8. 0, sony xperla nx-02d, samsung galaxy S3/S4, and Sony S-series Tablet.

Draws power only from OTG port, current for USB devices is limited to host capability. The 4-port usb otg hub extends the micro usb otg port on the Pi Zero and allows you to plug in more USB devices such as keyboard, mouse, and WiFi dongle. With usb2. 0 4-port hub, u disk, keyboard, no external power needed no driver needed for android and PC with USB 2.

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Charging Dongle Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux #ad - 0 port transfer Rate: USB2. 0, 480/12mbps, for mouse, Camera, Printer and so on.

More information about MakerSpot AH10094 #ad


Similar products



Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin for Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR,South Bridge,North Bridge, with 3M 8810 Thermally Conductive Heat Transfer Tape

#ad
Gadgeter HS-BK-10 #ad - Color : black size : 22 x 22x 10mm/ 087" x 087" x 04" l*w*h material : aluminum compatible with raspberry pi 2, south bridge, raspberry pi b/b+, vga raM, Raspberry Pi A/A+, MOSFET, North Bridge, DC Boost Power Converter, Power Converter, LED Light etc. Easy plug and play installation device, 1. 5mbps.

10 pcs of aluminum heat sinks with 3M 8810 Thermally Conductive Heat Transfer Tape. Overall size : 22 x 22x 10mm/ 087" x 087" x 04" l*w*h. Specification : 10 pcs of aluminum heat sinks with 3M 8810 Thermally Conductive Heat Transfer Tape. With usb2. 0 4-port hub, keyboard, u disk, no external power needed no driver needed for android and PC with USB 2.

Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin for Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR,South Bridge,North Bridge, with 3M 8810 Thermally Conductive Heat Transfer Tape #ad - 0 port transfer Rate: USB2. 0, for mouse, camera, 480/12Mbps, Printer and so on. Weight : 20g. Package include : 10x aluminum heat sinks 10x 3M Thermally Conductive Heat Transfer Tape All Pad Are Not Pre Assembled.

More information about Gadgeter HS-BK-10 #ad


Similar products



Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version 40x10mm, Brown

#ad
Noctua NF-A4X10-FLX 5V #ad - With usb2. 0 4-port hub, u disk, keyboard, no external power needed no driver needed for android and PC with USB 2.0 port transfer Rate: USB2. 0, camera, for mouse, 480/12Mbps, Printer and so on. Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, Orange Pi, ODROID, Banana Pi.

Compatible with samsung galaxy s2, samsung galaxy note, sony xperla acro hdis12s. Toshiba regza phone-to1D, Galaxy Tab3 8. 0, sony xperla nx-02d, samsung galaxy S3/S4, and Sony S-series Tablet. Draws power only from OTG port, current for USB devices is limited to host capability. Weight : 20g. Topped off with modular cabling, the OmniJoin Adaptor Set, the NF-A4x10 5V is a premium choice for demanding 5V applications.

Smooth commutation drive technology and Noctua’s reference class SSO2 bearing guarantee superb running smoothness and excellent long-term stability. Ideal replacement for noisy or broken 5v 4cm fans in 3D printers, DVRs, routers, NAS, other network and storage devices, switches, etc.3-pin 5v version with 4500rpm, not to be used at 12V such as in PC environments.

Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version 40x10mm, Brown #ad - Includes anti-vibration mounts, Low-Noise Adaptor, fan screws, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers. Compatible with raspberry pi 2, mosfet, vga ram, raspberry pi b/B+, South Bridge, dc boost power converter, North Bridge, Raspberry Pi A/A+, Power Converter etc.

More information about Noctua NF-A4X10-FLX 5V #ad


Similar products



8Bitdo M30 Bluetooth Gamepad for Nintendo Switch, PC, macOS and Android with Sega Genesis & Mega Drive Style

#ad
8Bitdo 6922621500735 #ad - Weight : 20g. Compatible with raspberry pi 2, south bridge, dc boost power converter, VGA RAM, raspberry pi b/B+, mosfet, North Bridge, Raspberry Pi A/A+, Power Converter etc. Premium quiet fan, 4500 rpm, 40x40x10 mm, >150, 3-pin molex, 5v, 17.9 dba, 000 h mtTF. Award-winning 40x10mm a-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.

. Includes anti-vibration mounts, Low-Noise Adaptor, fan screws, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers. A sega genesis & Mega Drive inspired bluetooth controller. Compatible with nintendo Switch, PC, macOS and Android. Bluetooth and rechargeable battery. Turbo Function.

8Bitdo M30 Bluetooth Gamepad for Nintendo Switch, PC, macOS and Android with Sega Genesis & Mega Drive Style #ad - Upgradeable firmware. With usb2. 0 4-port hub, keyboard, u disk, no external power needed no driver needed for android and PC with USB 2.0 port transfer Rate: USB2. 0, camera, for mouse, 480/12Mbps, Printer and so on. Easy plug and play installation device, 1.

More information about 8Bitdo 6922621500735 #ad


Similar products



8Bitdo M30 2.4G Wireless Gamepad for the Original Sega Genesis and Sega Mega Drive - Sega Genesis,Black

#ad
8Bitdo 6922621500834 #ad - Weight : 20g. Highest quality retro Controller available, Designed with attention and care. Upgradeable firmware. Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, ODROID, Orange Pi, Banana Pi. Compatible with samsung galaxy s2, samsung galaxy note, sony xperla acro hdis12s.

Toshiba regza phone-to1D, Galaxy Tab3 8. 0, samsung galaxy s3/s4, sony xperla NX-02D, and Sony S-series Tablet. Draws power only from OTG port, current for USB devices is limited to host capability. Easy plug and play installation device, 1. 5mbps. 10 pcs of aluminum heat sinks with 3M 8810 Thermally Conductive Heat Transfer Tape.

8Bitdo M30 2.4G Wireless Gamepad for the Original Sega Genesis and Sega Mega Drive - Sega Genesis,Black #ad - Overall size : 22 x 22x 10mm/ 087" x 087" x 04" l*w*h. Ideal replacement for noisy or broken 5v 4cm fans in 3D printers, DVRs, routers, other network and storage devices, NAS, switches, etc.3-pin 5v version with 4500rpm, not to be used at 12V such as in PC environments. Compatible with raspberry pi 2, mosfet, south bridge, north Bridge, Raspberry Pi A/A+, raspberry pi b/B+, dc boost power converter, VGA RAM, Power Converter etc.

More information about 8Bitdo 6922621500834 #ad


Similar products



8Bitdo Retro Bluetooth Receiver for the Original Sega Genesis and Mega Drive - Sega Genesis

#ad
8Bitdo 6922621500827 #ad - Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, ODROID, Orange Pi, Banana Pi. Compatible with samsung galaxy s2, samsung galaxy note, sony xperla acro hdis12s. Toshiba regza phone-to1D, Galaxy Tab3 8. 0, sony xperla nx-02d, samsung galaxy S3/S4, and Sony S-series Tablet.

Draws power only from OTG port, current for USB devices is limited to host capability. Update your firmware at support. 8bitdo. Com. Weight : 20g. Upgradeable firmware. Compatible with raspberry pi 2, raspberry pi a/a+, vga rAM, mosfet, North Bridge, dc boost power converter, South Bridge, raspberry pi b/B+, Power Converter etc.

8Bitdo Retro Bluetooth Receiver for the Original Sega Genesis and Mega Drive - Sega Genesis #ad - . Premium quiet fan, 3-pin molex, 5v, >150, 4500 rpm, 40x40x10 mm, 17.9 dba, 000 h mtTF. Award-winning 40x10mm a-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance. Highest quality retro Controller available, Designed with attention and care.

More information about 8Bitdo 6922621500827 #ad


Similar products



TurboGrafx-16 mini

#ad
Konami JP HTG-010 #ad - Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, ODROID, Orange Pi, Banana Pi. Compatible with samsung galaxy s2, samsung galaxy note, sony xperla acro hdis12s. Toshiba regza phone-to1D, Galaxy Tab3 8. 0, sony xperla nx-02d, samsung galaxy S3/S4, and Sony S-series Tablet.

Draws power only from OTG port, current for USB devices is limited to host capability. Includes anti-vibration mounts, Low-Noise Adaptor, fan screws, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers. A sega genesis & Mega Drive inspired bluetooth controller. Compatible with nintendo Switch, PC, macOS and Android.

TurboGrafx-16 mini #ad - Bluetooth and rechargeable battery. Turbo Function. Upgradeable firmware. 2. 4g wireless Technology. Upgradeable firmware. Easy plug and play installation device, 1. 5mbps. 10 pcs of aluminum heat sinks with 3M 8810 Thermally Conductive Heat Transfer Tape.

More information about Konami JP HTG-010 #ad


Similar products



8Bitdo SN30 Pro USB Gamepad for Nintendo Switch, Windows, Raspberry Pi SN Edition

#ad
8Bitdo RET00169 #ad - Weight : 20g. With usb2. 0 4-port hub, u disk, keyboard, no external power needed no driver needed for android and PC with USB 2.0 port transfer Rate: USB2. 0, camera, 480/12mbps, for Mouse, Printer and so on. Compatible with raspberry pi 2, raspberry pi b/b+, south Bridge, VGA RAM, North Bridge, mosfet, Raspberry Pi A/A+, dc boost power converter, Power Converter etc.

. Premium quiet fan, 4500 rpm, >150, 3-pin molex, 40x40x10 mm, 5v, 17.9 dba, 000 h mtTF. Award-winning 40x10mm a-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance. Expands into 4 usb ports for raspberry pi zero v1. 3 with camera connector and w with Bluetooth and Wifii, Orange Pi, ODROID, Banana Pi.

8Bitdo SN30 Pro USB Gamepad for Nintendo Switch, Windows, Raspberry Pi SN Edition #ad - Compatible with samsung galaxy s2, samsung galaxy note, sony xperla acro hdis12s. Toshiba regza phone-to1D, Galaxy Tab3 8. 0, samsung galaxy s3/s4, sony xperla NX-02D, and Sony S-series Tablet. Draws power only from OTG port, current for USB devices is limited to host capability. Upgradeable firmware. Easy plug and play installation device, 1.

More information about 8Bitdo RET00169 #ad


Similar products



8Bitdo M30 2.4G Wireless Gamepad for Sega Genesis Mini and Mega Drive Mini - Sega Genesis

#ad
8Bitdo 6922621501015 #ad - Ideal replacement for noisy or broken 5v 4cm fans in 3D printers, other network and storage devices, switches, routers, NAS, DVRs, etc.3-pin 5v version with 4500rpm, not to be used at 12V such as in PC environments. Highest quality retro Controller available, Designed with attention and care. Highest quality retro Controller available, Designed with attention and care.

Includes japanese PC Engine games. Wired controller, USB Cable: 1. 8m. Compatible with switch Version 3. 00 or above, Windows, Raspberry pi devices. Rumble Vibration. Support Turbo Function. Compatible with sega Genesis mini, Mega drive mini and Nintendo Switch. Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers.

8Bitdo M30 2.4G Wireless Gamepad for Sega Genesis Mini and Mega Drive Mini - Sega Genesis #ad - A sega genesis & Mega Drive inspired bluetooth controller. Compatible with nintendo Switch, PC, macOS and Android. Bluetooth and rechargeable battery. Turbo Function.

More information about 8Bitdo 6922621501015 #ad


Similar products



HD Retrovision Wii/Wii U Premium YPbPr Component Video Cable

#ad
HD Retrovision FSY-W11-006 #ad - Ideal replacement for noisy or broken 5v 4cm fans in 3D printers, NAS, other network and storage devices, routers, DVRs, switches, etc.3-pin 5v version with 4500rpm, not to be used at 12V such as in PC environments. Use these high-quality cables to connect your Wii or Wii U console to the YPbPr component video inputs on your TV or other video equipment.

The fully shielded design eliminates audio and video crosstalk, while the 75Ω 75 ohm impedance effectively transmits the full video detail even at 1080p resolutions. Includes 8bitdo m30 2. 4g controller, 2. 4g receiver & USB cable. Update your firmware at support. 8bitdo. Com. These cables are properly engineered and constructed to deliver the best analog video & audio out of your Wii or Wii U console.

HD Retrovision Wii/Wii U Premium YPbPr Component Video Cable #ad - If this a concern for you, then please test your equipment using HD Retrovision's 240p/288p Compatibility Test prior to purchasing. It's set to return in the form of the TurboGrafx-16 mini, a new compact model that comes preloaded with a selection of popular titles*! Hd retrovision cables are properly engineered and constructed; don't settle for cheap unshielded cables which result in poor video quality and audio interference issues.

Highest quality retro Controller available, Designed with attention and care.

More information about HD Retrovision FSY-W11-006 #ad


Similar products