DFRobot Bluno – an Bluetooth 4.0 BLE Board Based on Arduino

#ad
DFRobot DFR0267 #ad - Bluno integrates a TI CC2540 BT 4. 0 chip with the Arduino UNO development board. Specification *on-board ble chip: ti cc2540 *wireless programming via ble *support bluetooth hid *support at command to config the ble *transparent communication through Serial *DC Supply:USB Powered or External 7V~12V DC *Microcontroller: Atmega328 *Bootloader: Arduino Uno *Compatible with the Arduino Uno pin mapping Shipping List *Bluno 1 unit Dfrobot bluno series is an arduino-compatible bluetooth 4.

0ble hardware solution designed by makers, smart App controlling, and for makers. Bluno is also compatible with all arduino uno pins which means any project made with Uno can directly go wireless! What's more, we also developed an App for Bluno both Android and IOS and they are completely opensource. Through the low-power Bluetooth 4.

DFRobot Bluno - an Bluetooth 4.0 BLE Board Based on Arduino #ad - 0 technology, real-time low energy communication can be made really easy. It allows wireless programming via ble, supports Bluetooth HID, AT command to config BLE and you can upgrade BLE firmware easily. Bluno is first of its kind in intergrating BT 4. 0ble module into arduino uno, making it an ideal prototyping platform for both software and hardware developers to go BLE.

Introduction It's time to get Bluetooth 4. 0 into your project and sync it up with your phone! For aficionados of smart devices and wearables with this new tech BT4.

More information about DFRobot DFR0267 #ad

The Smallest Microcontroller for Arduino Bluetooth 4.0 BLE - Beetle BLE

#ad
DFRobot DFR0339 #ad - Just like a native Arduino board, but with Bluetooth 4. 0 For students and makers who cannot afford too much on hardware purchasing, Beetle can be a great solution for them. An app called play bluno is available on IOS and Android which gives a quick access to this little tiny board. Specification bluetooth chip: cc2540 sensitivity: -93dbm working temperature: -10 ℃ ~ +85 ℃ maximum distance: 30m Open field Microcontroller: ATmega328 Clock frequency: 16 MHz Operating voltage: 5V DC Input voltage: >> https://wiki.

Dfrobot. Com/bluno_beetle_SKU_DFR0339. With the v shaped gilded i/o interface, it is convenient to screw conductor wire on it, which could a good choice in the wearable market. It is fully compatible with Bluno in instructions and procedures. It not only supports USB programming, but also wireless uploading method.

The Smallest Microcontroller for Arduino Bluetooth 4.0 BLE - Beetle BLE #ad - This beetle ble is another milestone in the Beetle line, which makes DIY users have more options in the project design. It is probably the smallest Arduino BLE board in the market. The beetle ble offers a super tiny and low cost Arduino with bluetooth 4. 0 The beetle ble can be used for disposable projects, gift projects, such as DIY projects, workshops, E-Textiles wearable and educational.

More information about DFRobot DFR0339 #ad


Similar products



DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano

#ad
DSD TECH ML-HM-10 #ad - It is probably the smallest Arduino BLE board in the market. If you meet any question, we will fix your issue within 24 hours. If all is okay, you should receive AT+ANCSpara1 command from module UART. Ibeacon support:you can make this module into ibeacon mode. So you can have your own ibeacon. It also supports Apple Notification Center Service ANCS.

How to enable apple notification Center Service ANCS ANCS function 1. 1 please read apple notification ducument first 1. 2 send at+type3 command change to AUTH and BOND mode. Low energy: with hm-10 bluetooth 4. 0 module, you can add Bluetooth features to your project and support iphone4s or later. Dsd tech brand 4pin base board: through this base board, TX, GND, leads to VCC, RX.

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano #ad - Default passcode is "000000" 1. 5 send at+reset to restart module. This is a Bluetooth 4. 0 module with 4pin base board that can support iphone4s or later. All bluno products are Bluetooth 4. 0 ready, smart app controlling, and enjoy features such as wireless programming, and plentiful periphery modules.

More information about DSD TECH ML-HM-10 #ad


Similar products



ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant

#ad
ELEGOO EL-CB-001 #ad - We'd like to receive your valuable suggestions for our products and make your idea come true. Ibeacon support:you can make this module into ibeacon mode. So you can have your own ibeacon. It also supports Apple Notification Center Service ANCS. Super compact size / support wireless programming. Product wiki >>> https://wiki.

Dfrobot. Com/bluno_beetle_SKU_DFR0339. So we can control the quality of our productions by ourselves for you. [email protected] / bluetooth low energy bt 4. 0 / micro usb port. Technical Specification - User Guide. Working voltage 3. 6 v to 6v, please contact us, default rate of 9600 We have always cared about the customer experience and improve the product function details.

ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant #ad - Dfrobot bluno series is an arduino-compatible bluetooth 4. 0ble hardware solution designed by makers, long communication range, and for makers. Faster transfer rates and more memory. Control using atmel atmega328p chipthe same with Arduino UNO R3. It is probably the smallest Arduino BLE board in the market.

More information about ELEGOO EL-CB-001 #ad


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
ELEGOO EL-CB-005 #ad - Faster transfer rates and more memory. Control using atmel atmega328p chipthe same with Arduino UNO R3. Working voltage 3. 6 v to 6v, please contact us, default rate of 9600 The nano is a small, complete, and breadboard-friendly board based on the ATmega328 Arduino Nano 3. X. Download user Guide on this page for more information.

Low energy: with hm-10 bluetooth 4. 0 module, you can add Bluetooth features to your project and support iphone4s or later. Dsd tech brand 4pin base board: through this base board, TX, leads to VCC, GND, RX. You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2pmf4in technical specs microcontroller: atmega328 architecture: avr operating voltage: 5 v\ flash memory: 32 kb of which 2 kb used by bootloader sram: 2 kb clock speed: 16 mhz analog i/o pins: 8 eeprom: 1 kb dc current per i/o pins: 40 ma i/o pins input Voltage: 7-12 V Digital I/O Pins: 22 PWM Output: 6 Power Consumption: 19 mA PCB Size: 18 x 45 mm Weight: 7 g Package Include : 3 X Nano Board ATTENTION: We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - Dsd tech back this Bluetooth 4. 0 le module with one Year WARRANTY. Product wiki >>> https://wiki. Dfrobot.

More information about ELEGOO EL-CB-005 #ad


Similar products



STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm84oz.in 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

#ad
OSM Technology Co.,Ltd. 17HS19-2004S #ad - It is probably the smallest Arduino BLE board in the market. The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, GND on one top, so users have more breadboard space.

Important notice: some customers reported they bought this model from other sellers under this listing, but found much of difference with our descriptionno connector and shorter leads. Nema 17 bipolar 1. 65"x1. 65"x1. 89" 4-wire. Any technical issues after purchase please contact with our tech-support team: [email protected]

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm84oz.in 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC #ad - Com. [email protected] / bluetooth low energy bt 4. 0 / micro usb port. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 01" pitch 2.

More information about OSM Technology Co.,Ltd. 17HS19-2004S #ad


Similar products



EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables

#ad
EDGELEC ED-DP_L20_Mix_120pcs #ad - We have always cared about the customer experience and improve the product function details. You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2jklJMO. Package include: 20cm 7. 9inch / 40pin male to female jumper wires / 40pin female to female jumper wires / 40pin Male to Male jumper wires Total 120pcs.

Connector type: standard 2. 54mm pitch dupont housing connector / 1pin-1pin. Download user Guide on this page for more information. It's got a pin layout that works well with the Mini or the Basic Stamp TX, RX, ATN, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.

EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables #ad - Package include: 20cm 7. 9inch / 40pin male to female jumper wires / 40pin female to Female jumper wires / 40pin Male to Male jumper wires Total 120pcs Dfrobot bluno series is an arduino-compatible bluetooth 4.0ble hardware solution designed by makers, long communication range, and for makers. Technical Specification - User Guide.

If you meet any question, we will fix your issue within 24 hours. New improvement: clear prints on the female header connector, more precise and easier to use the wire. The elegoo uno r3 board now uses an atmega16u2 instead of the ATMega8U2 chip.

More information about EDGELEC ED-DP_L20_Mix_120pcs #ad


Similar products



Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New

#ad
Makerfire BC22523 #ad - 100% compatible with the Arduino IDE and RoHS Compliant. Any technical issues after purchase please contact with our tech-support team: [email protected] Com. 59ncm83. 6oz. In holding torque. Available software to set the address, can be directly connected to a variety of microcontrollers, only received local Address when output dataProvide interrupt instruction, Software programming is very convenient.

Nema 17 bipolar 1. 65"x1. 65"x1. 89" 4-wire. Working voltage 3. 6 v to 6v, please contact us, default rate of 9600 Output power, frequency channels, and protocol setup are easily. Programmable through a SPI interface. Built-in power Down and Standby modes makes power saving easily realizable. It is probably the smallest Arduino BLE board in the market.

Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New #ad - Model: nrf24L01. Built-in 2. 4ghz antenna. Dfrobot bluno series is an arduino-compatible bluetooth 4.

More information about Makerfire BC22523 #ad


Similar products



DFRobot Bluno Mega 2560 - a Mega 2560 with Bluetooth 4.0 based on Arduino

#ad
DFRobot DFR0323 #ad - Use the driver from above link. It is a smallest, complete, and breadboard friendly board. Model: nrf24L01. Cable length: 20cm 7. 9 inch / cable material: 12-core pure copper wire. Dsd tech back this Bluetooth 4. 0 le module with one Year WARRANTY. All bluno products are Bluetooth 4. 0 ready, smart app controlling, and enjoy features such as wireless programming, long communication range, and plentiful periphery modules.

Specificationmicrocontroller:atmega2560clock frequency: 16mhztransmission distance: 70m in open spacesupport bluetooth remote update the arduino programsupport bluetooth hidsupport ibeaconssupport by the at command to debug the BLESupport transparent transmission serial portSupport the master-slave machine switchSupport usb update BLE chip programWorking voltage:+5VExternal input voltage recommended:7 ~ 12V DCExternal input voltage range:6 ~ 20V DCDigital I/O outputs: 54 14 PWM outputsAnalog inputs: 16I/O current: 40mAFlash capacity: 256KB 4k for bootloaderStatic storage capacity of SRAM: 8KBMemory capacity of EEPROM: 4KBSize: 108 x 54mm4.

DFRobot Bluno Mega 2560 - a Mega 2560 with Bluetooth 4.0 based on Arduino #ad - 25 x 2. 13"more advantagesCompared with the first Bluetooth 4. 0 integrated arduino board, Bluno, Bluno Mega2560 not only inherits the advantages of this Bluetooth 4. 0 wireless communication function, but also enables more digital and analog ports allowing bigger code storage space. Nema 17 bipolar 1. 65"x1.

More information about DFRobot DFR0323 #ad


Similar products



ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant

#ad
ELEGOO EL-CB-003 #ad - 59ncm83. 6oz. In holding torque. 1mm dc barrel jack compatible with 5. Rated current 2. 0a & resistance 1. 4ohms. Arduino mega is the high-end series of the arduino controller. Download user Guide on this page for more information. Use 5. The power source is automatically selected to the highest voltage source. 3d printer motor with high torque.

In future, shields will be compatible both with the board that use the AVR, that is reserved for future purposes. Stronger reset circuit. Package include: 20cm 7. 9inch / 40pin male to female jumper wires / 40pin female to female jumper wires / 40pin Male to Male jumper wires Total 120pcs. Connector type: standard 2.

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant #ad - 54mm pitch dupont housing connector / 1pin-1pin. We have always cared about the customer experience and improve the product function details. You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2jklJMO. 3v. 5mm dc barrel jack.

More information about ELEGOO EL-CB-003 #ad


Similar products



Integreight 1Sheeld+: The Arduino shield for iOS and Android

#ad
Integreight, Inc. 8541582406 #ad - Uses a standard bluetooth module to HM-10 BLE 4. 0 Thanks to the 1sheeld app available on the App Store and Google Play Store you can easily associate your smartphone to it and turning your smartphone into a generic Arduino shield itself. Please find technical specification and then download documents. Faster transfer rates and more memory.

Control using atmel atmega328p chipthe same with Arduino UNO R3. Nema 17 bipolar 1. 65"x1. 65"x1. 89" 4-wire. Technical Specification - User Guide. The 1sheeld library gives to your Arduino the full control of the smartphone. 5mm dc barrel jack. Product wiki >>> https://wiki. Dfrobot. Com/bluno_beetle_SKU_DFR0339. Works with iphone 4s and later generations iOS 9 and above and Android 4.

Integreight 1Sheeld+: The Arduino shield for iOS and Android #ad - 3 and above devices. Arduino mega is the high-end series of the arduino controller. 59ncm83.

More information about Integreight, Inc. 8541582406 #ad


Similar products