Dorhea ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini Pack of 5

#ad
Dorhea #ad - 2. Start arduino and open Preferences window. On linux & mac osx, you don't need install it, comes preinstalled with OS. Installing with git recommend: we recommend using GIT to install Hardware package, you can always get the latest version of it. A great set of tools to develop ESP8266. D1 mini, it is a mini nodemcu Lua WiFi board based on ESP-8266EX.

. Support OTA on line. Wifi development Board, 4M bytes. 1 micro USB connection. Package includes: 5 x mini nodemcu lua wifi wireless module This is d1 mini, it is a mini nodeMcu Lua WiFi board based on ESP-8266EX. 11 digital input / pwm / output pins, all pins with interrupt / i2c / support 1 line except D0; 1 analog input3.

Dorhea ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini Pack of 5 #ad - 2v max input. Esp8266 has i/O Pin. Installing hardware package: there is two ways to install hardware package, Boards Manager or GIT Installing with Boards Manager: Starting with 1. 6. 4, arduino allows installation of third-party platform packages using Boards Manager. 4. Open tools→board:xxx→boards manager and install esp8266 by ESP8266 Community and don't forget to select your ESP8266 board from Tools > Board menu after installation.

More information about Dorhea #ad

HiLetgo 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3

#ad
HiLetgo 3-01-0039-1 #ad - The single-wire wiring scheme makes it easy to be integrated to other applications. The dht11 is a pre-calibrated digital output temperature and humidity sensor. Specification: Power supply voltage: 3. 3~5. 5v dc output: the single bus digital signal measuring range: 20-90%rh humidity, temperature 0~50° the measurement accuracy of +-5%RH: humidity, temperature +-2 ° Resolution: 1%RH humidity, temperature 1 ° Exchangeability: fully interchangeable Long term stability: < ± 1%RH Size: 28 * 12 * 7.

2mm interface Description: 1. Vcc:external 3. 3 v-5 v 2. Gnd:external Gnd 3. Do:small board switch digital output interface, connect the microcontroller IO port Package Included: 5* DHT11 Module 5* Dupont Cable Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

HiLetgo 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3 #ad - It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

The product has excellent quality, anti-interference ability, fast response, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications. And the simple communication protocol greatly reduces the programming effort required.

More information about HiLetgo 3-01-0039-1 #ad


Similar products



SHELLY 1 One Smart Relay Switch Wireless WiFi Home Automation iOS Android Application 2 Pack

#ad
Allterco Robotics EOOD Shelly1 #ad - Shelly 1 does not need any home automation controllers. Remotely turn on or off the connected devices. Weekly scheduling - Create custom daily schedules for your devices. High compatibility - control all your home appliances with your voice. Also, you can share your experience with developers all over the world.

Control appliances with pre-set on-off function - Control wide range of home appliances with the help of the free Shelly Cloud application. Check your home appliances status anytime and anywhere and control them on and off. 24/7 application support - free ios/android Shelly Cloud application. You can check your devices status anywhere and anytime.

Shelly 1 open source provides complete smart Home Automation solution for your apartment, house or office and helps significantly reduce electricity usage and cost, without changing the existing wiring or purchasing expensive and difficult to operate hardware. The shelly 1 os are Google home and Amazon Echo Compatible.

SHELLY 1 One Smart Relay Switch Wireless WiFi Home Automation iOS Android Application 2 Pack #ad - Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.

Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.

More information about Allterco Robotics EOOD Shelly1 #ad


Similar products



IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5 …

#ad
IZOKEE IZKE29-5 #ad - 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection. Supported except D0 Support OTA on line. How to get it started in arduino: - Setup driver Before you use mini D1 boards, you need set up CH340g driver. Wifi development Board, 4M bytes. You can check your devices status anywhere and anytime.

5v 1a switching power supply onboard. Check your home appliances status anytime and anywhere and control them on and off. 24/7 application support - free ios/android Shelly Cloud application. The shelly 1 os are Google home and Amazon Echo Compatible. This d1 mini module is a mini WIFI board based on ESP-8266EX.

IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WIFI Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5 … #ad - This wlan board contains 11 digital input / I2C / output pins, all pins have interrupt / pwm / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Remotely turn on or off the connected devices. Weekly scheduling - Create custom daily schedules for your devices.

High compatibility - control all your home appliances with your voice. Package includes: 5 x d1 mini nodemcu lua wlan wifi internet Development Board Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.

More information about IZOKEE IZKE29-5 #ad


Similar products



DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino

#ad
DIYmall 4331029690 #ad - Condition:100% brand new with good quality Product Type: HC--SR501 Body Sensor Module Operating voltage range: DC 4. 5-20v quiescent Current:.

More information about DIYmall 4331029690 #ad


Similar products



HiLetgo 2pcs Wemos D1 Mini Development Board ESP8285 V1.0.0 1MB Flash Lite Wireless WiFi Internet Development Board Wemos D1 Mini ESP8285

#ad
HiLetgo® #ad - The led pin on this board is "2". Warranty: one year warranty, any question please feel free to contact. Tips: * for the pin layout, Google "Wemos mini NodeMcu". Once both of these are installed open up the Arduino IDE. Set the "reset Method" to: nodemcu. You will want the files under the ch340g-ch34g-ch34x-mac-os-x-driver repository.

Micro usb connection; compatible with Arduino; 1MB Flash; 500mA resettable fuse. Be aware that the old driver can cause your machine to lock up. In the "board manager" search for and install the latest version of the "esp8266" generic module. The shelly 1 os are Google home and Amazon Echo Compatible. This d1 mini module is a mini WIFI board based on ESP-8266EX.

HiLetgo 2pcs Wemos D1 Mini Development Board ESP8285 V1.0.0 1MB Flash Lite Wireless WiFi Internet Development Board Wemos D1 Mini ESP8285 #ad - This wlan board contains 11 digital input / output pins, all pins have interrupt / I2C / pwm / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Use potentiometer 105, output timing is from 05s to 200S. Remotely turn on or off the connected devices.

Weekly scheduling - Create custom daily schedules for your devices.

More information about HiLetgo® #ad


Similar products



Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway

#ad
Aeon Labs LLC ZW090 #ad - With z-stick gen5 you’ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. Check your home appliances status anytime and anywhere and control them on and off. 24/7 application support - free ios/android Shelly Cloud application. This is enough for most projects.

You can check your devices status anywhere and anytime. If you installed an earlier version of the driver the one I had had no version number in the file name search for instructions to remove it. Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.

Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway #ad - Tiny but powerful; 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices. This is a powerful internet of things development board; standalone board mount, stackable on top, or stackable top and bottom. Although these d1 minis have only 16 pins, plus the ground and one 3 volt and one 5 volt pin.

Same product link https://www. Amazon. Com/dp/b07csm3K63.

More information about Aeon Labs LLC ZW090 #ad


Similar products



HiLetgo 3pcs 5V D1 mini Relay Shield 5V D1 mini Relay Module for WeMos D1

#ad
HiLetgo #ad - If you installed an earlier version of the driver the one I had had no version number in the file name search for instructions to remove it. Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices.

The shelly 1 os are Google home and Amazon Echo Compatible. This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / pwm / output pins, all pins have interrupt / I2C / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.

HiLetgo 3pcs 5V D1 mini Relay Shield 5V D1 mini Relay Module for WeMos D1 #ad - Use potentiometer 105, output timing is from 05s to 200S. No: 5a250vac/30vdc, 10a125vac, max:1250va/150W. Micro usb connection; compatible with Arduino; 1MB Flash; 500mA resettable fuse. Be aware that the old driver can cause your machine to lock up. Make your arduino project live and usable in your automation project.

Package included: 5 x hc-SR501 PIR Infared Sensor.

More information about HiLetgo #ad


Similar products



Element14 Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. 5a adapter is required. Technical specifications:- broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1. 4ghz- 1gb ram - bcm43143 wifi on board- bluetooth low energy ble on board- 40 pin extended gpio - 4 x usb2 ports- 4 pole stereo output and composite video port- Full size HDMI- CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data- Upgraded switched Micro USB power source now supports up to 2.

5 amps. Package contents :- 1x raspberry pi 3 model B+ Dht11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.

Element14 Raspberry Pi 3 B+ Motherboard #ad - Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected. The product has excellent quality, fast response, anti-interference ability, high cost and other advantages. The single-wire wiring scheme makes it easy to be integrated to other applications.

And the simple communication protocol greatly reduces the programming effort required. Open source - use the power of mongoose os to make your own application.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products



Gowoops 2 PCS DHT22 Temperature Humidity Sensor Module Digital Measurement for Arduino Raspberry Pi 2 3

#ad
Gowoops #ad - Certification number: ZC10-15060006. No: 5a250vac/30vdc, 10a125vac, max:1250va/150W. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. P>with fixing screw hole, convenient for install and fixed.

P>please choose the original seller: Gowoops, we don't guarantee the quality of the products bought from other seller. Wemos d1 mini Relay Shield. The shelly 1 os are Google home and Amazon Echo Compatible. This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / pwm / output pins, all pins have interrupt / I2C / 1-wire and a micro-USB connection.

Gowoops 2 PCS DHT22 Temperature Humidity Sensor Module Digital Measurement for Arduino Raspberry Pi 2 3 #ad - Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Use potentiometer 105, output timing is from 05s to 200S. If you installed an earlier version of the driver the one I had had no version number in the file name search for instructions to remove it.

Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1.

More information about Gowoops #ad


Similar products



Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament Genuine Capricorn Premium Tubing

#ad
Capricorn #ad - P>operate voltage: dc 3~5. 5v. P>please choose the original seller: Gowoops, we don't guarantee the quality of the products bought from other seller. Same product link https://www. Amazon. Com/dp/b07csm3K63. Wemos d1 mini relay shield 5V D1 mini Relay Module. Make your arduino project live and usable in your automation project.

It was developed specifically for 1. 75mm filament with an extremely precise internal diameter. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Brand: Capricorn. Check your home appliances status anytime and anywhere and control them on and off. 24/7 application support - free ios/android Shelly Cloud application. Note: on this retrigger jumper is a solder jumper, and you need solder it by yourself.

Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament Genuine Capricorn Premium Tubing #ad - 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. P>with fixing screw hole, convenient for install and fixed. When printing flixible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.

More information about Capricorn #ad


Similar products