Miuzei Raspberry Pi 3B+ Case with Fan, HDMI Cable, 16GB SD Card, 2.5 A Power Supply and 3 Pcs Heat-Sinks Compatible with Raspberry Pi 3 B+, 3 B, 2 B

#ad
Miuzei MC13 #ad - Made of acrylic, the pi case makes sure that won't block Pi's Wifi / Bluetooth signal. 2 kindly to know this case can't fit for ASUS tinker board. Accurate plugs on the case are available to connect Pi's GPIO, USB, SD, HDMI, Power Supply etc ports. The case also can compatible with raspberry pi 3 model b+ / 3 model b / 2 model b /.

This is 2018 new designed 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 / pi 3 model b/ pi 2 / pi 2 model b. Package included: 1x acrylic case for raspberry pi 3 model b+ / 3 / 2 1x 16 GB SD card1x HDMI cable1x Mute Cooling Fan 1x 5V 2. 5a power supply with micro usb cable 3x aluminum heat sinks 4x metal screws 4x metal nuts any question there, please don't hesitate to contact us to get services via Buyer Message or Q&A Note: Please tear off the protective films on the top&bottom layers before use 1 Small components inside, please away from young kids below 3yrs.

Miuzei Raspberry Pi 3B+ Case with Fan, HDMI Cable, 16GB SD Card, 2.5 A Power Supply and 3 Pcs Heat-Sinks Compatible with Raspberry Pi 3 B+, 3 B, 2 B #ad - Miuzei raspberry pi 3 b+ case with fan, 3 pcs heatsinks, 1m hdmi cable, 16 gb sd card, 1.5m usb cable with 5V 2. 5a power supplyNot include Pi Board. Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components.

More information about Miuzei MC13 #ad

Element14 Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - New original raspberry Pi 3 Model B+ Built-in Broadcom 1. 802. 11n wireless lan, 10/100Mbps Lan Speed. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

4ghz- 1gb ram - bcm43143 wi-fi on board- bluetooth low energy ble on board- 40 pin extended gpio - 4 x usb2 ports- 4 pole stereo output and composite video port- Full size HDMI- CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - Micro SD port for loading your operating system and storing data- Upgraded switched Micro USB power source now supports up to 2.

Element14 Raspberry Pi 3 B+ Motherboard #ad - 5a adapter is required. 4ghz quad-core 64 bit processor with low energy on-board wi-fi bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.

Technical specifications: - broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1. 5 amps. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products



RS Components Raspberry Pi 3 B+ Motherboard

#ad
RS Components 3BPLUS-R #ad - 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM. Bluetooth 4. 2, bluetooth Low Energy.

The rs components raspberry pi 3 model b+ is the latest product in the Raspberry Pi 3 range, featuring a 64-bit quad core processor running at 1. 4ghz, dual-band 2. 4ghz and 5ghz wireless LAN, Bluetooth 4. 2/ble, faster ethernet, and PoE capability via a separate PoE HAT. This product is made by RS Components and comes in RS Components packaging.

RS Components Raspberry Pi 3 B+ Motherboard #ad - Required for Operation Not Included 2. 5a microusb power supply recommended class 10 microsd card pre-loaded with Pi 3 B+ compatible software USB or Bluetooth keyboard/mouse Optional HDMI or DSI Display Optional 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Dual band 2. 4ghz and 5ghz ieee 802. 11.

More information about RS Components 3BPLUS-R #ad


Similar products



Miuzei Raspberry Pi 3 b+ Screen, 3.5 Inch Touch Screen Resolution 480 320 to 1920 1080 for Raspberry Pi 3 Model B+, 3B, 2B with Touch Pen MP-3.5

#ad
Miuzei #ad - Bluetooth 4. 2, bluetooth Low Energy. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. Please backup your system if you want to use the touch function at your current system, you need add the Driver debugging system by yourself need more time to do that. So we suggest that you use our system which has the screen driver installed and then the screen can be working well without the complicated operation.

With the hdmi interface, the refreshes could up to 60 frames per second. The 3. 5" display monitor with touch function Support systems input resolution support 480*320 to 1920*10803:2 ratio is better. Poe hat support, camera interface CSI, display interface DSI, 40 GPIO Pins. Made by rs components and comes in RS Components packaging.

Miuzei Raspberry Pi 3 b+ Screen, 3.5 Inch Touch Screen Resolution 480 320 to 1920 1080 for Raspberry Pi 3 Model B+, 3B, 2B with Touch Pen MP-3.5 #ad - Bluetooth 4. 2, bluetooth Low Energy. Hdmi interface: support any hdmi hd interface, data entry computer, HDMI audio input, DVD, stereo 3.5mm audio output. Display function support system: raspbian, kali, Retrope, ubuntu, windows10 Just need install OS Touchfunction Support System:Kali, raspbian, ubuntupi 3b.

Come with detailed tutorials in a cd including project introductions and source code for free, screen driver installing on existing systems is not supported.

More information about Miuzei #ad


Similar products



Raspberry Pi 3 Model B+ Mini Computer with High Performance Heatsink Set

#ad
LoveRPi RPI3B+HS #ad - The new board also has built-in support for wireless technologies like Dual-Band 2. 4ghz 802. 11n and 5ghz 802. 11ac wifi and Bluetooth 4. 2 low Energy. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM. Required additional components not included: Certified 2. 5a power supply and properly Flashed MicroSD Card required for operation! Proper power and software: if the red led on the board blinks or turns off at any time, your power supply is not providing adequate voltage.

Raspberry Pi 3 Model B+ Mini Computer with High Performance Heatsink Set #ad - The raspberry pi 3 model b+ is the latest raspberry Pi Foundation mini computer with a quad core 64 bit ARMv8 CPU operating at 1. 4ghz. Do not drive 2. 5a current for prolonged durations as it will shorten the lifetime of the board components. You no longer need to take up two USB ports and USB bandwidth so the performance as a NAS device increases.

. This is a welcomed addition that is bound to save many users the hassle of getting wireless setup.

More information about LoveRPi RPI3B+HS #ad


Similar products



CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

#ad
CanaKit NA #ad - An exclusive kit from canakit that includes the fastest model of the raspberry Pi family - the Raspberry Pi 3 Model B+ B Plus!The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1. 4 ghz. Poe hat support, display interface DSI, Camera interface CSI, 40 GPIO Pins.

Made by rs components and comes in RS Components packaging. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core.1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM.

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed #ad - Important note: if you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. Set of 2 aluminum Heat Sinks. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. 802.

More information about CanaKit NA #ad


Similar products



Freenove Ultimate Starter Kit for Raspberry Pi 3 B+, 434 Pages Detailed Tutorials, Python C Java, 223 Items, 57 Projects, RPi 3B+ 3B 3A+ 2B 1B+ 1A+ Zero W

#ad
Freenove NA #ad - Please note this kit DOES NOT include Raspberry Pi. Not included in this kit. Get support -> our technical service team is always ready to answer your questions. Required additional components not included: Certified 2. 5a power supply and properly Flashed MicroSD Card required for operation!3 programing languages -> C, Python compatible with 2&3 and Java virtual interface.

434 pages detailed pdf tutorials include basic electronics knowledge and complete code -> Download link: https://github. Com/freenove/freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master. Zip. Bluetooth 4. 2, bluetooth Low Energy. 223 items for 57 interesting projects -> Each project has circuit diagram and tested code with detailed explanation.

Freenove Ultimate Starter Kit for Raspberry Pi 3 B+, 434 Pages Detailed Tutorials, Python C Java, 223 Items, 57 Projects, RPi 3B+ 3B 3A+ 2B 1B+ 1A+ Zero W #ad - Compatible models -> raspberry pi 3b+ / 3a+ / Zero W / 3B / 1a+ / 1b+ / 2b / Zero. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. Chapter 18 infrared Motion Sensor  Project 18.

More information about Freenove NA #ad


Similar products



Raspberry Pi 7" Touch Screen Display

#ad
Raspberry Pi 7TOUCH #ad - With the hdmi interface, the refreshes could up to 60 frames per second. The 3. 5" display monitor with touch function Support systems input resolution support 480*320 to 1920*10803:2 ratio is better. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. 802. 11n wireless lan, 10/100Mbps Lan Speed.

Adapter board is used to power the display and convert the parallel signals from the display to the serial DSI port on the Raspberry Pi. 223 items for 57 interesting projects -> Each project has circuit diagram and tested code with detailed explanation. Compatible models -> raspberry pi 3b+ / zero W / 1b+ / 1a+ / 2b / 3a+ / 3B / Zero.

Raspberry Pi 7" Touch Screen Display #ad - 3 programing languages -> C, Python compatible with 2&3 and Java virtual interface. 434 pages detailed pdf tutorials include basic electronics knowledge and complete code -> Download link: https://github. Com/freenove/freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master. Zip. Not included in this kit.

Get support -> our technical service team is always ready to answer your questions. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way.

More information about Raspberry Pi 7TOUCH #ad


Similar products



Raspberry Pi 32GB Preloaded NOOBS SD Card

#ad
Raspberry Pi 5647440341 #ad - Fully qualified by the Raspberry Pi Foundation for Optimum Performance. Sandisk ultra class 10 MicroSD Card in OEM black color packaging. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM. The adapter board handles power, signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

Raspberry Pi 32GB Preloaded NOOBS SD Card #ad - Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. 223 items for 57 interesting projects -> Each project has circuit diagram and tested code with detailed explanation. Compatible models -> raspberry pi 3b+ / 3a+ / 1a+ / 3B / Zero W / 2b / 1b+ / Zero. Bluetooth 4.

More information about Raspberry Pi 5647440341 #ad


Similar products



Vilros Retro Gaming 5 USB Classic Controller Set- Nintendo NES, Super Nintendo SNES, Sega Genesis, Nintendo 64 N64, Playstation 2 PS2 Great for RetroPie,PC, Raspberry Pi Gamepad

#ad
Vilros #ad - Hdmi interface: support any hdmi hd interface, data entry computer, HDMI audio input, DVD, stereo 3.5mm audio output. Display function support system: raspbian, kali, windows10 Just need install OS Touchfunction Support System:Kali, Retrope, raspbian, ubuntu, ubuntupi 3b. Come with detailed tutorials in a cd including project introductions and source code for free, screen driver installing on existing systems is not supported.

Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. 223 items for 57 interesting projects -> Each project has circuit diagram and tested code with detailed explanation. Compatible models -> raspberry pi 3b+ / 2b / 1a+ / 3B / 1b+ / 3a+ / Zero W / Zero.

Vilros Retro Gaming 5 USB Classic Controller Set- Nintendo NES, Super Nintendo SNES, Sega Genesis, Nintendo 64 N64, Playstation 2 PS2 Great for RetroPie,PC, Raspberry Pi Gamepad #ad - Please backup your system if you want to use the touch function at your current system, you need add the Driver debugging system by yourself need more time to do that. Vilros retro gaming 5 usb classic controller set includes 1x nintendo nes, mame, hyperspin, controller 1x super Nintendo SNES 1x Sega Genesis 1x Nintendo 64 N64 1x Playstation 2 PS2 Great for RetroPie, PC, NeoGeo FBA Emulator, Raspberry Pi Gamepad 1.

4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Bluetooth 4. 2, bluetooth Low Energy. With the hdmi interface, the refreshes could up to 60 frames per second.

More information about Vilros #ad


Similar products



Raspberry Pi Camera Module V2-8 Megapixel,1080p

#ad
Raspberry Pi RPI-CAM-V2 #ad - The raspberry pi camera v2 features the same, tiny footprint 25mm x 23mm x 9mm as the original Pi Camera module, but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels. 223 items for 57 interesting projects -> Each project has circuit diagram and tested code with detailed explanation.

Compatible models -> raspberry pi 3b+ / 3b / 1b+ / 1a+ / 3a+ / 2b / Zero W / Zero. Fully covered by the Vilros 1 Year Manufacture Warranty. 2a power supply Highly Recommended. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. With the hdmi interface, the refreshes could up to 60 frames per second.

Raspberry Pi Camera Module V2-8 Megapixel,1080p #ad - The 3. 5" display monitor with touch function Support systems input resolution support 480*320 to 1920*10803:2 ratio is better. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography, motion detection, recording video, and security applications.

Bluetooth 4.

More information about Raspberry Pi RPI-CAM-V2 #ad


Similar products