Mudder 8 Piece Black Aluminum Heatsink Cooler Cooling Kit for Raspberry Pi 3, Pi 2, Pi Model B+

#ad
Mudder LYSB01GE7Q060-ELECTRNCS #ad - These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Adhesive thermal tape backing. These heat sinks can be applied in other devices such as the BeagleBone to cool processor, regulators, etc. Material: aluminium Package includes: 4 * 035 inch x 035 inch 8. 9 mm x 8.

9 mm aluminum heat sink 4 * 056 inch x 056 inch 14. 2 mm x 14. 2 mm aluminum heat sink suitable for raspberry pi models A, B, 2, B+, and 3 boards. Set of 8 aluminum heat sinks. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC.

Mudder 8 Piece Black Aluminum Heatsink Cooler Cooling Kit for Raspberry Pi 3, Pi 2, Pi Model B+ #ad - Raspberry pi not included. Can be applied with other devices such as the BeagleBone. 8 pieces cooling aluminium heat sink for Raspberry Pi models A, B, 2, B+, and 3 boards.

More information about Mudder LYSB01GE7Q060-ELECTRNCS #ad

Raspberry PI 3 Model B A1.2GHz 64-bit quad-core ARMv8 CPU, 1GB RAM

#ad
RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad - To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. 5a adapter is required. Bluetooth 4. 1, bluetooth Low Energy. Built on the latest broadcom 2837 armv8 64 bit processor the Raspberry Pi 3 Model B is faster and more powerful than its predecessors.

Technical specifications: - broadcom bcm2837 64bit ARMv8 QUAD Core 64bit Processor powered Single Board Computer running at 1. 2ghz - 1gb ram - bcm43143 wifi on board - bluetooth low energy ble on board - 40pin extended gpio - 4 x usb2 ports - 4 pole stereo output and composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source now supports up to 2.

Raspberry PI 3 Model B A1.2GHz 64-bit quad-core ARMv8 CPU, 1GB RAM #ad - 5 amps this product is made under license in both China and the U. K. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 Power Supply / Adapter / Charger UL Listed

#ad
Cana Kit Corporation DCAR-RSP-2A5 #ad - 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. With this power supply, you can power the Raspberry Pi 3 at full load as well as up to 1. 2a across the four USB ports. Standard 5v usb power supplies in the market have a high voltage drop when the full current is drawn from them which may cause the Raspberry Pi to reboot unexpectedly.

Bluetooth 4. 1, bluetooth Low Energy. 2. 5a is now a requirement for the Raspberry Pi 3. It is also ideal for use by anyone over-clocking the Raspberry Pi which causes higher power requirements that a lower power adapter may not be able to supply. Micro USB plug. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.

CanaKit 5V 2.5A Raspberry Pi 3 Power Supply / Adapter / Charger UL Listed #ad - 5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2.

5a and still output a voltage well within the USB minimum voltage specifications. 5 feet cord length.

More information about Cana Kit Corporation DCAR-RSP-2A5 #ad


Similar products



Raspberry Pi 3 - by Raspberry Vine - Fits Pi 3 2 3B 2B B+ A+ B A - Four 4 Layer Complete Stackable Dog Bone Case - Clear Stack Enclosure

#ad
Raspberry Vine 6868599 #ad - High-quality clear 3mm acrylic comes with a protective covering that needs to be removed before assembly. All ports accessible. Complete four layer kit compatible with current Raspberry Pi's including 3 B, 2 B, B+ and A. Complete kit for Up To Four Layers. Output 5v dc 2. 5a regulated input 100V to 240V AC. Raspberry pi's not included! Enlarge photos in listing for assembly reference.

This case gives you access to all ports such as micro SD card, USB ports, GPIO pins, Ethernet and HDMI.802. 11n wireless lan, 10/100Mbps Lan Speed. Not compatible With Pi Zero. 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Fast shipping from the US - Sold By Actual IT Professionals. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.

Raspberry Pi 3 - by Raspberry Vine - Fits Pi 3 2 3B 2B B+ A+ B A - Four 4 Layer Complete Stackable Dog Bone Case - Clear Stack Enclosure #ad - 5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Compatible with all full-size rectangle Pi's with four mounting holes.

More information about Raspberry Vine 6868599 #ad


Similar products



NES case for Raspberry Pi 3,2 and B+ by Old Skool Tools

#ad
Old Skool Tools 150719830 #ad - 5 feet cord length. Micro USB plug. Compatible with current raspberry Pi's including 3, B+, 2 B, 2B. Solid 3mm laser Cut Acrylic. Complete kit for Up To Four Layers. Not compatible With Pi Zero. Easy access to the SD-Card and all other ports without opening the case. 802. 11n wireless lan, 10/100Mbps Lan Speed. The nes case provides access to every outlet of the Raspberry Pi without opening the case.

4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Inspired by the Nintendo Entertainment System.

NES case for Raspberry Pi 3,2 and B+ by Old Skool Tools #ad - This firm design, made out of plastic is held together with the 4 provided bolts. This unique design is made out of durable plastic and was designed to fit perfectly on the Raspberry Pi 3, 2 and B+. The air vents provide good ventilation while in use. Ul listed.

More information about Old Skool Tools 150719830 #ad


Similar products



Black/Grey - Official Raspberry Pi 3 Case

#ad
Raspberry Pi RPI3CASE-BG #ad - Enclose your board as much or as little as necessary to best suit your latest project. Compatible with current raspberry Pi's including 3, 2 B, B+, 2B. Solid 3mm laser Cut Acrylic. Official case for the Raspberry Pi from the Raspberry Pi Foundation. Bluetooth 4. 1, bluetooth Low Energy. Easy access to the SD-Card and all other ports without opening the case.

1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. The official case of the Raspberry Pi Foundation has been refreshed for the Pi 3. 5 feet cord length. 802. 11n wireless lan, 10/100Mbps Lan Speed. Complete kit for Up To Four Layers. Designed with Pi HAT's in mind. Designed with HATs in mind and featuring multiple removable panels.

Black/Grey - Official Raspberry Pi 3 Case #ad - Nes case specifically designed for Raspberry Pi 3, 2 and B+. Output 5v dc 2. 5a regulated input 100V to 240V AC. This firm design, made out of plastic is held together with the 4 provided bolts.

More information about Raspberry Pi RPI3CASE-BG #ad


Similar products



Enokay Power Supply for Raspberry Pi 5V 2.5A Micro USB Charger Adapter with On Off Switch

#ad
Shen Zhen Eno Electronic Co.,Ltd #ad - Compatible with current raspberry Pi's including 3, B+, 2 B, 2B. Solid 3mm laser Cut Acrylic. This firm design, made out of plastic is held together with the 4 provided bolts. Cable length: 1. 5 meter. Official case for the Raspberry Pi from the Raspberry Pi Foundation. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.

5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Bluetooth 4. 1, bluetooth Low Energy. Designed with Pi HAT's in mind.

Enokay Power Supply for Raspberry Pi 5V 2.5A Micro USB Charger Adapter with On Off Switch #ad - Complete kit for Up To Four Layers. 802. 11n wireless lan, 10/100Mbps Lan Speed. 5 feet cord length. Nes case specifically designed for Raspberry Pi 3, 2 and B+. Output 5v dc 2. 5a regulated input 100V to 240V AC.

More information about Shen Zhen Eno Electronic Co.,Ltd #ad


Similar products



Red/White - Official Raspberry Pi 3 Case

#ad
Raspberry Pi motorcontrolboard #ad - Removable side panels with easy access to the GPIO port. Official case for the Raspberry Pi from the Raspberry Pi Foundation. Input:ac 100-240v/ 50-60hz ;output:dC 5V/2500mA. Inspired by the Nintendo Entertainment System. Fast shipping from the US - Sold By Actual IT Professionals. Designed with Pi HAT's in mind.

This firm design, made out of plastic is held together with the 4 provided bolts. Enclose your board as much or as little as necessary to best suit your latest project. Enough power supply for your raspberry pi 2 3 and your USB device. Bluetooth 4. 1, bluetooth Low Energy. Output 5v dc 2. 5a regulated input 100V to 240V AC.

Red/White - Official Raspberry Pi 3 Case #ad - 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Removable lid provides easy access to the camera and display ports.

More information about Raspberry Pi motorcontrolboard #ad


Similar products



Raspberry Pi 7" Touchscreen Display

#ad
RASPBERRY PI #ad - This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port.

4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Ul listed. Note: the display works with all existing Raspberry Pi models, however the mounting holes only line up with the newer board design of the A+, B+ and Pi 2.

Raspberry Pi 7" Touchscreen Display #ad - Kit contents: 7" touchscreen display adapter board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires Technical Specifications 7" Touchscreen Display. Micro USB plug. No need to pull the cable to restart or reboot your PI, just press the button to turn your Pi on and off. The adapter board handles power, signal conversion, and touch input conversion.

More information about RASPBERRY PI #ad


Similar products



Case for the Official Raspberry Pi 7" Touchscreen Display - Adjustable angle

#ad
Smarticase #ad - Enough power supply for your raspberry pi 2 3 and your USB device. Small metal mounts are also included that allow you to create a minimal footprint and attach to walls or any surface. Official case for the Raspberry Pi from the Raspberry Pi Foundation. Pivoting adjustable angle and also wall mountable. Micro USB plug.

We also offer another version that has LEGO compatible studs on the front of the case. Input:ac 100-240v/ 50-60hz ;output:dC 5V/2500mA. Removable lid provides easy access to the camera and display ports. Please note that the hDMI port on the Raspberry Pi is not accessible with this case. The case is made out of strong ABS plastic.

Case for the Official Raspberry Pi 7" Touchscreen Display - Adjustable angle #ad - Complete kit for Up To Four Layers. Removable side panels with easy access to the GPIO port. The adapter board handles power, signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires. Ul listed. Works with Raspberry Pi HAT boards.

This case version has no LEGO compatible studs on the front.

More information about Smarticase #ad


Similar products



8 Megapixel,1080p - Raspberry Pi Camera Module V2

#ad
Raspberry Pi RPI-CAM-V2 #ad - Designed with Pi HAT's in mind. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port.

802. 11n wireless lan, 10/100Mbps Lan Speed. 5 feet cord length. Fast shipping from the US - Sold By Actual IT Professionals. No need to pull the cable to restart or reboot your PI, just press the button to turn your Pi on and off. 2a power supply Highly Recommended. Works with Raspberry Pi HAT boards. Lego compatible Raspberry Pi camera case that attaches to back included.

8 Megapixel,1080p - Raspberry Pi Camera Module V2 #ad - Removable side panels with easy access to the GPIO port. Easy access to the SD-Card and all other ports without opening the case. Input:ac 100-240v/ 50-60hz ;output:dC 5V/2500mA. Output 5v dc 2.

More information about Raspberry Pi RPI-CAM-V2 #ad


Similar products