This operating mode has been present in low-cost WiFi modules for years and has found myriad uses in research, development and security auditing but no such solution existed for 2. 4ghz standards until now. The entire board is only two and a half inches long with a USB-A connector at one end and an RP-SMA connector at the other.
. A 2. 4ghz 'rubber duck' style antenna is included, along with an RP-SMA to SMA adapter so you can attach other SMA antennas of your choosing. Also contains an expansion connector intended for inter-Ubertooth communication and other future uses. Warranty and support services available directly through Nooelec!
The ubertooth One is an open source 2. 4 ghz wireless development platform suitable for 2. 4ghz experimentation. Contains a standard cortex serial debug connector 10-pin 50-mil JTAG for in-system programming ISP. Also, because it's a fully open-source platform software and hardware, the schematics and code are readily available for all of your hacking needs.
One thing that sets the Ubertooth apart from other 2. 4ghz development platforms is that it's capable of not only sending and receiving 2. 4 ghz signals, but can also operate in monitor mode, monitoring traffic in real-time.
NooElec Yard Stick One USB Transceiver & 915MHz Antenna
An antenna is not included. The radio functions that are possible by customizing IM-Me firmware are now at your fingertips when you attach YARD Stick One to a computer via USB. Female sma connector for connecting external antenna of your choice. Yard yet another radio dongle stick One can transmit or receive digital wireless signals at frequencies below 1 GHz.
Yard stick one also has cc bootloader installed, so you can upgrade RFCat or install your own firmware without any additional programming hardware. Integrated receive amplifier and transmit amplifier. A 915mhz sma antenna is included! Capabilities: ✔ half-duplex transmit and receive ✔ official operating frequencies: 300-348 mhz, ook, 391-464 mhz, and 782-928 mhz ✔ unofficial operating frequencies: 281-361 MHz, 2-FSK, and 749-962 MHz ✔ modulations: ASK, 4-FSK, 378-481 MHz, GFSK, MSK ✔ data rates up to 500 kbps ✔ Full-Speed USB 2.
0 yard stick one comes with RfCat firmware installed, courtesy of atlas. Ant500 is recommended as a starter antenna for YARD Stick One. Rfcat allows you to control the wireless transceiver from an interactive Python shell or your own program running on your computer. Originally based on the toorcon 14 badge design, yard stick one has several featured not previously seen in cc1111 platforms features: ✔ sma connector for external antennas such as ant500 ✔ receive amplifier for improved sensitivity ✔ transmit amplifier for higher output power ✔ strong RF performance across the entire operating frequency range ✔ low pass filter for elimination of harmonics when operating in the 800 and 900 MHz bands ✔ antenna port power control for compatibility with antenna port accessories designed for HackRF One ✔ GoodFET-compatible expansion and programming header ✔ GIMME-compatible programming test points Usb transceiver capable of transmitting and receiving most popular licence-free bands.
It uses the same radio circuit as the popular IM-Me.
NooElec Aluminum Enclosure & EMI Shield, Black, for Great Scott Gadgets Ubertooth One & Yard Stick One
ANT500 - The Telescopic Antenna for HackRF One or YARD Stick One
Yard Stick One Enclosure
NooElec HackRF One Software Defined Radio (SDR), ANT500 & SMA Antenna Adapter Bundle
Great Scott Gadgets Ubertooth One, Antenna & Aluminum Enclosure Bundle by Nooelec
RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas
RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)
NooElec NESDR Smart Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.
NooElec RF EMI Shield & Board-Level Kit for HackRF One
ANT700 - The Telescopic Antenna for HackRF One or YARD Stick One