RS Raspberry Pi 7-Inch LCD Touch Screen Case, Black

#ad
Raspberry Pi FBA_102035 #ad - Note: raspberry pi board and Raspberry Pi LCD touch screen are sold separately. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. The case also acts as a bezel to the display, improving its appearance while housing The board neatly behind it.

This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. Case compatible only with the official Raspberry Pi 7" Lcd touch screen.

More information about Raspberry Pi FBA_102035 #ad

Raspberry Pi 7" Touch Screen Display

#ad
Raspberry Pi 7TOUCH #ad - This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port.

Screen dimensions: 194mm x 110mm x 20mm including standoffs viewable screen size: 155mm x 86mm Screen resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board Using a ribbon cable connected to the dsi port. Kit contents: 7” touchscreen display adapter board dsi ribbon cable 4 x stand-offs and screws 4 x jumper wires technical Specifications 7” Touchscreen display.

Raspberry Pi 7" Touch Screen Display #ad - Adapter board is used to power the display and convert the parallel signals from the display to the serial dsi port on the Raspberry Pi. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

Latest version of Raspbian OS required to operate correctly. Note: the display works with all existing Raspberry Pi models, however the mounting holes only Line up with the newer board design of the a+, b+ and Pi 2.

More information about Raspberry Pi 7TOUCH #ad


Similar products



Element14 Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - 5 amps. 4ghz quad-core 64 bit processor with low energy on-board wi-fi bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.

Technical specifications: - broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1. New original raspberry Pi 3 Model B+ Built-in Broadcom 1. Package contents : - 1x raspberry pi 3 model b+ this 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

Element14 Raspberry Pi 3 B+ Motherboard #ad - The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. The adapter board handles power, Signal conversion, and touch input conversion.

Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. Bluetooth 4. 2, bluetooth Low Energy. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products



CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

#ad
CanaKit NA #ad - The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

. It incorporates built-in WiFi and Bluetooth connectivity with enhanced dual-band 2. 4 ghz and 5 ghz wiFi, Bluetooth 4. 2/ble and faster Ethernet. To take full advantage of the improved power management on the Raspberry Pi 3 B+ and provide even support for even more powerful devices on the USB ports, a 2. 5a adapter is recommended.

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed #ad - The power supply included in this kit incorporates a noise filter to provide the highest stability and comes with a 5-foot cable. Noobs 2. 7. 0 or later is required for operation of the B+. Bluetooth 4. 2, bluetooth Low Energy. Dual band 2. 4ghz and 5ghz ieee 802.

More information about CanaKit NA #ad


Similar products



Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction

#ad
Yapears 6598564451 #ad - Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Canakit Quick-Start Guide. Bluetooth 4. 2, bluetooth Low Energy. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core.

Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. 802. 11n wireless lan, 10/100Mbps Lan Speed. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction #ad - The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. The adapter board handles power, Signal conversion, and touch input conversion.

More information about Yapears 6598564451 #ad


Similar products



Raspberry Pi 7" Touchscreen Display

#ad
RASPBERRY PI 2205755 #ad - 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM.

The product ships with all relevant accessories This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Raspberry Pi 7" Touchscreen Display #ad - Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. The product ships with all relevant accessories. Brand New in box. 802. 11n wireless lan, 10/100Mbps Lan Speed. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

Set of 2 aluminum Heat Sinks.

More information about RASPBERRY PI 2205755 #ad


Similar products



CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed

#ad
Cana Kit Corporation DCAR-RSP-2A5 #ad - The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed #ad - Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Output 5v dc 2. 5a regulated input 100V to 240V AC. 5 feet cord length. This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2.

5a and still output a voltage well within the USB minimum voltage specifications.

More information about Cana Kit Corporation DCAR-RSP-2A5 #ad


Similar products



Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera Specific Pack of 2, 1 Set

#ad
Arducam B0091 #ad - In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector. 5 feet cord length. By using high speed hdmi cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras.

In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector. Ul listed. This system works with all Raspberry Pi models. It can be used to extend standard audio signals, GPIO signals or other sensor signals according to users need.

Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera Specific Pack of 2, 1 Set #ad - The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. If you need a longer and stronger cable with solid connections, it is right thing for you. Features: supported for raspberry pi a/b/b+ boards or raspberry pi 2b board or raspberry pi 3b board supported for raspberry pi camera board V1 5MP OV5647 or raspberry pi camera board V2 8MP IMX219 HDMI cables can be up to 10 meters more than 10 meters wasn't tested Reserved microphone and headphone jack for audio or GPIO signals Three additional solder pads are available same signals as headphone jack Size:27.

63 x 25. 00mm package including: 2pcs arducam csi to hdmi cable extension module 2pcs 60mm 15pin FPC cable 4sets M2 screw This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

More information about Arducam B0091 #ad


Similar products



Raspberry Pi Camera Module V2-8 Megapixel,1080p

#ad
Raspberry Pi RPI-CAM-V2 #ad - It can be used to extend standard audio signals, GPIO signals or other sensor signals according to users need. In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector. Brand new in box. Sony exmor imx219 sensor capable of 4k30, 1080P60, 720p180, 8MP Still.

3280 h x 2464 v active Pixel Count. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Raspberry Pi Camera Module V2-8 Megapixel,1080p #ad - Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, Display interface DSI, VideoCore IV 3D graphics core.

Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography, motion detection, recording video, and security applications.

More information about Raspberry Pi RPI-CAM-V2 #ad


Similar products



Eleduino Raspberry Pi Official 7" Touchscreen Display Bamboo Case

#ad
Eleduino bc1 #ad - This system works with all Raspberry Pi models. 802. 11n wireless lan, 10/100Mbps Lan Speed. Maximum of 1080p30 and 8MP Stills in Raspberry Pi Board. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector.

This arducam csi to hdmi cable extension module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1 and V2 cameras. Micro USB plug. Packing list: 1, official 7" touchscreen bamboo case*12, rubber feet*1 This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

Eleduino Raspberry Pi Official 7" Touchscreen Display Bamboo Case #ad - The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. Ul listed.

Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed.

More information about Eleduino bc1 #ad


Similar products



RS Components Raspberry Pi 3 B+ Motherboard

#ad
RS Components 3BPLUS-R #ad - 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM.

5 feet cord length. This arducam csi to hdmi cable extension module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1 and V2 cameras. Set of 2 aluminum Heat Sinks. Poe hat support, display interface DSI, Camera interface CSI, 40 GPIO Pins. Made by rs components and comes in RS Components packaging.

RS Components Raspberry Pi 3 B+ Motherboard #ad - The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. Output 5v dc 2. 5a regulated input 100V to 240V AC.

More information about RS Components 3BPLUS-R #ad


Similar products