Top 8 Break Beam Sensor – Security & Surveillance Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Seco-Larm

#ad

Seco-Larm E-964-S50TB Multi-Frequency Single Photobeam Sensor; 4 selectable frequencies to reduce interference; Up to 50ft 15m sensing distance; Replaced E-961-S50TB

#ad
Seco-Larm #ad - Mounting hardware included, dimensions: 3-11/16" x 2-3/8" x 1-13/16", Weight: 2. 6-oz. Small size for a less conspicuous installation, Simple to install. Led indicators for power, signal strength, and trigger; Weatherproof for outdoor as well as indoor use IP65. Built-in agc control to filter out lighting disturbances, Signal strength indicator for easier alignment. 4 selectable frequencies to reduce interference, Up to 50ft 15m sensing distance.
BrandSeco-Larm #ad
ManufacturerSeco-Larm #ad
Height3.7 Inches
Length2.36 Inches
Weight0.16 Pounds
Width1.81 Inches
Part NumberE-964-S50TB
ModelE-964-S50TB

2. Seco-Larm

#ad

Seco-Larm E-931-S35RRQ Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam Sensor with 35 Foot Range

#ad
Seco-Larm #ad - 12~240vdc / 24~240vac operation, current: Up to [email protected] For outdoors gates, garage doors, etc; Weatherproof IP66 construction for indoor/outdoor usage. Sensing range: 05' to 35' 01 - 11m, response Time: 10ms Max. Bracket and mountinghardware Included, Pre-wired 6ft 1. 8m cord. Dark on operation, Adjustable sensing distance, Compact size.
BrandSeco-Larm #ad
ManufacturerSeco-Larm #ad
Height2 Inches
Length5.75 Inches
Weight0.7 Pounds
Width3.5 Inches
Part NumberE-931-S35RRQ
ModelE-931-S35RRQ

3. HTZSAFE

#ad

HTZSAFE Solar Wireless Driveway Alarm System- 1/2 Mile Long Transmission Range- 300 Feet Wide Sensor Range- No Wiring No Need Replace Battery- Outdoor Weatherproof DIY Security Perimeter Alert System

#ad
HTZSAFE #ad - Match different ring tones with different sensors around your property to differentiate where motion is being detected. Diy design, super easy to set up in minutes-no power cables because the sensor is solar powered;no signal cables because the signal is wireless transmission;so the installation time can be as little as a few minutes. No wiring no need to replace batteries- the sensors are self-powered by solar recharged lithium ion batteries;no need sunlight, the nature light on cloudy and rainy days also can charge the batteries normally; requires no wiringboth the power cables and signal cables.

4 volume levels adjustment and 35 ring tones optional. Lower false alarm rate-the use of active and multiple infrared beams reduce false alarms from small animals and small objects such as birds and falling leaves;super infrared penetrating power reduce false alarms from the bad weather such as rain/fog/snow;infrared analysis technology reduce false alarms from the other nature light sources interference such as sunlight.

Wide range of applicationdriveway alert, perimeter alarm and etc- the infrared detection range of the solar sensors up to 300 feet, that means the infrared sensing terminals can be mounted up to 300 feet apart;and will send a wireless alarm signal back to the wireless alarm receiver up to 1/2 mile away anytime someone passes between the solar sensorsActual range will vary depending on the local terrain. Fully expandable system- the kit includes 1 pair solar wireless photoelectric beam sensors and 1 piece AC/Battery powered new version alarm receiver. Expandable up to 32 sensors and unlimited alarm receivers for complete coverage of your property.
BrandHTZSAFE #ad
ManufacturerHTZSAFE #ad
Part Number4040SQ3
Model4040S+T001Q3

4. HTZSAFE

#ad

HTZSAFE Solar Wireless Outdoor Photoelectric 3 Beam Sensor WaterproofIP66 Wireless Transmission Range Up To 1/2 Mile Infrared Detection Range Up To 300 Feet

#ad
HTZSAFE #ad - No wiring&no need to replace batteries- self-powered by solar recharged lithium ion batteries;no need sunshine, the nature light on cloudy and rainy days also can charge the batteries normally; requires no wiringboth the power cables and signal cables. Extra solar sensor compatible with original drivway alarm by HTZSAFE.

Easy to set up- the solar sensor is equipped with self-calibration tools calibration hole and digital calibration screen, capable of finishing long range calibration in minutes. Wide range of applicationdriveway, that means the infrared sensing terminals can be mounted up to 300 feet apart;and will send a wireless alarm signal back to the solar receiver up to 1/2 mile away anytime someone passes between the solar sensorsActual range will vary depending on the local terrain;the detecting sensitivity is adjustable, perimeter defense and etc- the infrared detection range of the solar sensors up to 300 feet, you can do it yourself according to the actual application.

Lower false alarm rate- the use of active and multiple infrared beams reduce false alarms from small animals and small objects such as birds and falling leaves;super infrared penetrating power reduce false alarms from the bad weather such as rain/fog/snow;infrared analysis technology reduce false alarms from the other nature light sources interference such as sunshine.
BrandHTZSAFE #ad
ManufacturerHTZSAFE #ad
Weight4 Pounds
Part NumberHB-T001Q3+
ModelHB-T001Q3+

5. angshi

#ad

Infrared Beam Sensor,1 Pair Single Photoelectric Detector Active IR Alarm Host for Security System

#ad
angshi #ad - Active regulation: resistant to strong light up to 50, to avoid the impact of strong light or car lights. Moreover, built-in automatic adjustment of strong light filter system, 000 LUX, the detector will automatically enhance sensitivity when encountering heavy fog or bad weather. Agc circuit.

Unique desigh: high-power transmitter, high-power infrared transmitter-receiver pair tube, 90% sensitivity margin, low-power processing technology lightning protection circuit design. High level of anti RFI/EMI capability and unique digital filter circuit design. Advanced technology: design with waterproof cover, all-weather integrated structure design of fully sealed waterproof fog, dust proof insect, etc. Enables it to work normally in harsh environment. Wide applicability: active infrared detector can replace the passive infrared intrusion detector installed in small supermarkets, convenience stores, window entrance protection, but also applicable to schools, visitors import and export, office buildings, dormitories, home courtyards and other security systems.

Installation: the best installation height should be more than 2ocm, please install the receiver, installation distance should be not less than 1 m; infrared protection device should be vertically placed, then the transmitterwhen in a straight line, and in the same horizontal line. First, off light of receiver goes out, then fix, connect line and complete installatio.
Brandangshi #ad
Manufacturerangshi #ad
Height1.17 Inches
Length1.94 Inches
Weight0.24 Pounds
Width2.96 Inches
Part Numberqwe123

6. 32sports

#ad

Safety Beam, Invisible Infrared Beam Alert / Alarm

#ad
32sports #ad - Adjustable chime volume. Also suitable for use in retail stores or businesses. Can be used as an invisible playpen or to scare off would-be intruders in Alarm mode. Adjustable beam distance - Creates up to 60 ft long invisible infrared beam.
Brand32sports #ad
Manufacturer32sports #ad
Height7 Inches
Length9 Inches
Width4 Inches
Part Number632291671012
Model632291671012

7. DIYmall

#ad

DIYmall 10pcs/Pack IR Infrared Obstacle Avoidance Sensor for Arduino Smart Car Robot IR Transmitting and Receiving Tube Photoelectric Switch

#ad
DIYmall #ad - Vcc voltage is 3. 3v to 5v converter which can be directly connected to 5V single-chip microcontroller and 3. 3v. 2. 3. Out of small plate digital output interface 0 and 1. Package included: 10 X IR Infrared Obstacle Avoidance Sensor. Interface:1, 1. Gnd external GND.
BrandDIYmall #ad
ManufacturerDIYmall #ad
Height0.79 Inches
Length1.57 Inches
Width0.79 Inches
Part NumberFZ1990X10

8. AIRSUNNY

#ad

AIRSUNNY three Legs 5 pairs Infrared Diode LED IR Emission and Receiver

#ad
AIRSUNNY #ad - 30mm. Operate distance:18~20m. Frenqence:38KHz. Receiver angle:±45° Total Length approx. Receiver voltage:2. 7~5. 5v. Emission voltage 1-1. 5v if the voltage is too high, it is suggested to switch in current-limiting resistance.
BrandAIRSUNNY #ad
ManufacturerAIRSUNNY #ad
Part NumberAS-HWJS-5P
ModelAS-HWJS-5P