WINGONEER WiFi R3 ATmega2560 + ESP8266 USB-TTL for NodeMCU Arduino Mega

#ad
WINGONEER JP01686 #ad - For this on board have the USB-serial converter CH340G. Use this board is very simple. The board has DIP-switch, to connect the modules. For example, to: usb and atmeg2560, usb and esp8266, ATmega2560 and ESP8266. Table dip- switch:usb converter ch340g connect to rx0/tx0 of atmega2560esp8266 connect to rx3/tx3 of atmega2560package contains:1 x Mega +WiFi R3 Board" Full integration on a board: mega r3 ATmega2560 and WiFi ESP8266 with 32Mb memory.

All modules can work together or separately. Through usb you can update sketches and firmware for ATmega2560 and ESP8266. For this on board they have the CH340G USB serial converter. And all have their own pinout headers. For example, usb and esp8266, to: usb and atmeg2560, ATmega2560 and ESP8266. The convenient solution for the development of new projects that require UNO and WiFi.

WINGONEER WiFi R3 ATmega2560 + ESP8266 USB-TTL for NodeMCU Arduino Mega #ad - . The board has a DIP switch to connect the modules. All of the modules can work together or each separately. Wingoneer trademark Reg. No:4747611wingoneer wifi r3 atmega2560 + esp8266 usb-ttl for nodemcu arduino megafeatures:full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 8Mb. And everyone has their own pinout headers.

More information about WINGONEER JP01686 #ad

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant

#ad
ELEGOO EL-CB-003 #ad - Use 5. 5 * 2. So we can control the quality of our productions by ourselves for you. The second one is a not connected pin, shields will be compatible both with the board that use the AVR, the IOREF that allow the shields to adapt to the voltage provided from the board. 3v pin: 50 ma flash memory: 256 kb of which 8 kb used by bootloader sram: 8 kb eeprom: 4 kb clock speed: 16 mhz package includes: 1 x mega 2560 aTmega2560-16AU Board Arduino-compatible 1 x USB cable The mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant.

In future, that is reserved for future purposes. Stronger reset circuit. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3. 5mm dc barrel jack. This version is optimized in the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use.

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant #ad - The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. We'd like to receive your valuable suggestions for our products and make your idea come true.

More information about ELEGOO EL-CB-003 #ad


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. We have the manufacture factory, making productions and selling by ourselves. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires The mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant.

0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3. Packing in a color box. We have always cared about the customer experience and improve the product function details. We’d like to receive your valuable suggestions for our products and make your idea come true.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - 5 * 2. 3v. Use 5. So we can control the quality of our productions by ourselves for you. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Each cable length: about 20 cm /8-inch. The chip is atmega2560-16au and Atmega16u2, same with the official version.

More information about Elegoo EL-CP-004 #ad


Similar products



SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino R3 Mega2560

#ad
SunFounder 8541582407 #ad - 1mm dc barrel jack compatible with 5. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3. The second one is a not connected pin, shields will be compatible both with the board that use the AVR, the IOREF that allow the shields to adapt to the voltage provided from the board.

SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino R3 Mega2560 #ad - Introduction this is a high-quality I2C LCD 2004 display. Therefore, this is a perfect choice to make your project more interesting and vivid! For more information, refer to https://www. Sunfounder. Com/wiki/index. Php?title=i2c_lcd2004 package included 1 x i2c/iic lcd2004 module the mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant.

5 * 2. In future, that is reserved for future purposes. Stronger reset circuit. Packing in a color box. We have always cared about the customer experience and improve the product function details. 5mm dc barrel jack. Use 5.

More information about SunFounder 8541582407 #ad


Similar products



4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Arduino Proto Shield Distribution Connecting Blocks

#ad
REXQualis #ad - The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. 1mm dc barrel jack compatible with 5.

Material: abs plastic panel, Tin Plated Phosphor Bronze Contact Sheet. 830 tie points breadboards: 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails 400 tie points breadboards: 300 tie-point ic-circuit area plus 2x50 tie-point distribution strips providing 4 power rails The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color.

4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Arduino Proto Shield Distribution Connecting Blocks #ad - 400 point and 830 point breadboards are available to meet your various experimental needs. White abs plastic body with Black Printed Legend. In future, that is reserved for future purposes. Stronger reset circuit. Packing in a color box. We have always cared about the customer experience and improve the product function details.

5mm dc barrel jack. Sunfounder i2c lcd 2004 displays characters of 4 rows with 20 characters in each. Working voltage: 5v dc; Dimension: 60×99x22 mm.

More information about REXQualis #ad


Similar products



HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

#ad
HiLetgo® NA #ad - It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Each cable length: about 20 cm /8-inch. Http://wiki. Sunfounder. Cc/index. Php?title=i2c_LCD2004. The second one is a not connected pin, shields will be compatible both with the board that use the AVR, the IOREF that allow the shields to adapt to the voltage provided from the board.

Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. 5mm dc barrel jack. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3.

HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due #ad - Sunfounder i2c lcd 2004 displays characters of 4 rows with 20 characters in each. Working voltage: 5v dc; Dimension: 60×99x22 mm. Iic/i2c interface; only takes two I/O ports. I2c address: 0x27 or 0x3F. Compatible with arduino r3/mega2560 board. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

More information about HiLetgo® NA #ad


Similar products



HiLetgo 5pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V Humidity Measure Range 20%-95% Temperature Measure Range 0-50℃ Celsius with Dupont Wires

#ad
HiLetgo 3-01-0039-1 #ad - In future, that is reserved for future purposes. Stronger reset circuit. The simple communication protocol greatly reduces the programming effort required. The dht11 is a pre-calibrated digital output temperature and humidity sensor. Instruction: this sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board.

5 * 2. 400 point and 830 point breadboards are available to meet your various experimental needs. White abs plastic body with Black Printed Legend. 5 * 2. 3v. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

HiLetgo 5pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V Humidity Measure Range 20%-95% Temperature Measure Range 0-50℃ Celsius with Dupont Wires #ad - Each cable length: about 20 cm /8-inch. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. Http://wiki. Sunfounder.

More information about HiLetgo 3-01-0039-1 #ad


Similar products



KeeYees 3pcs ESP8266 NodeMCU CP2102 ESP-12E WiFi Internet Development Board Wireless Module Compatible with Arduino IDE

#ad
KeeYees 8541549622 #ad - Set up your arduino ide as: go to file->preferences and copy the URL below to get the ESP board manager extensions: http://arduino. Esp8266. Com/stable/package_esp8266com_index. Json placing the "http://" before the URL and let the Arduino IDE use it. Otherwise it gives you a protocol error. Go to file> examples> esp8266> blink, it will start blinking.

Package included:  3 x esp8266 nodemcu wifi development board the mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant. Color legend on Distribution Strips. With self-adhesive tape on the Back, Easy to Stick on the Arduino Prototype Shield. Inter connect any components with 20-29 Awg 0

KeeYees 3pcs ESP8266 NodeMCU CP2102 ESP-12E WiFi Internet Development Board Wireless Module Compatible with Arduino IDE #ad - 3-08mm Wire. Good for arduino breadboard Jumper Wires kit Project and other Electrical DIY kits. The module microsd card adapter is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver. Scm system can be completed within a file MicroSD card. Support micro sd card, Micro SDHC card high speed card.

More information about KeeYees 8541549622 #ad


Similar products



Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield

#ad
Glarks 8541770554 #ad - What you get: this kit includes all types of pin headers you need, 10 double pin headers, 12pcs breakaway male and female pin headers, including 50pcs long needle female pin headers, 40pcs short needle female pin headers, stored in a transparent plastic box to meets all your needs in one kit.2. 5 * 2. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. 1. Packing in a color box. We have always cared about the customer experience and improve the product function details. Application: perfect used for wire connecting in the field of Automotive, electrical appliances and Internet, especially for the computer and breadboard.

Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit, 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield #ad - Feature: they are the perfect height for clearing the USB-B connector and great for stacking multiple shields. In future, that is reserved for future purposes. Stronger reset circuit. 3. Color legend on Distribution Strips.

More information about Glarks 8541770554 #ad


Similar products



KeeYees 60pcs 5mm Pitch 2 Pin & 3 Pin PCB Mount Screw Terminal Block Connector for Arduino 50 x 2 Pin, 10 x 3 Pin

#ad
KeeYees #ad - It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Each cable length: about 20 cm /8-inch. Packing in a color box. We have always cared about the customer experience and improve the product function details.

Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. 4. The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. Rated value: ac 300V, 10A. For wire size: 14-22AWG. 5mm dc barrel jack. Data download access to the website: http://www.

KeeYees 60pcs 5mm Pitch 2 Pin & 3 Pin PCB Mount Screw Terminal Block Connector for Arduino 50 x 2 Pin, 10 x 3 Pin #ad - Nodemcu. Com. Feature: they are the perfect height for clearing the USB-B connector and great for stacking multiple shields. Arduino compatible, works great with the latest Arduino. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3.

More information about KeeYees #ad


Similar products



ARDUINO MEGA 2560 REV3 A000067

#ad
ARDUINO 2560 R3 #ad - The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. 400 point and 830 point breadboards are available to meet your various experimental needs. White abs plastic body with Black Printed Legend. In future, that is reserved for future purposes.

Stronger reset circuit. Arduino compatible, works great with the latest Arduino. Feature: they are the perfect height for clearing the USB-B connector and great for stacking multiple shields. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

ARDUINO MEGA 2560 REV3 A000067 #ad - Each cable length: about 20 cm /8-inch. Based on the 8-bit avr microcontroller atmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches. 5 * 2. 2 pin & 3 pin. The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. Data download access to the website: http://www.

More information about ARDUINO 2560 R3 #ad


Similar products